Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl SUPPORT FORUMS FOR DECWARE SPEAKER PLANS >> Housewrecker Support Forum >> Quad loaded Hw https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1139536410 Message started by Wreckinthehouse on 02/10/06 at 00:53:30 |
Title: Quad loaded Hw Post by Wreckinthehouse on 02/10/06 at 00:53:30 I'm curious to know what the benefit would be, to quad load a HW. I run two of them with dual 15's, would i benefit from putting all my subs in one HW? |
Title: Re: Quad loaded Hw Post by J_Rock on 02/10/06 at 02:01:03 you will loose some output, but theoretically it will offer much greater control over the driver's suspension non-linearities. It will lower distortion of the even types, 2nd, 4th, 6th etc. and should lower the odd a little bit too. |
Title: Re: Quad loaded Hw Post by Adrian D. on 02/10/06 at 05:20:40 you loose 3dB. it may go lower a few hz, because the chamber appear bigger all you need to know about iso loading |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |