Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
SUPPORT FORUMS FOR DECWARE SPEAKER PLANS >> Wicked One Support Forum >> Help with 4th order eclipse alum 12"s
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1138993949

Message started by haydenlake on 02/03/06 at 18:12:29

Title: Help with 4th order eclipse alum 12"s
Post by haydenlake on 02/03/06 at 18:12:29

Can anyone use BBpro to model 4th order bp for a pair of eclipse alum 12's. I've heard that winisd is not as accurate as BBPro for 4th order.

and if you reply thank you and please let me know which program you used.

thanks,
I'm on a Mac, not just lazy

Title: Re: Help with 4th order eclipse alum 12"s
Post by M3 on 02/08/06 at 19:04:49

Can you give the spec of the sub model?

Title: Re: Help with 4th order eclipse alum 12"s
Post by haydenlake on 02/09/06 at 05:20:08

thanks for the response but I wound up building a sealed box instead. The bp just would have been to big for that application and would kill the trunk room.

later,
b

Title: Re: Help with 4th order eclipse alum 12"s
Post by gonpi on 04/24/06 at 23:26:20

hi, everybody, i already build the box with spare wood fron another designs. Im a car audio installer from mexico, i really like to try new or rare designs.

The WO is cool, i put in it a pair of old almost destructed 10 inch pioneers, an the box really rocks. Like a pair of 15s the car i used for the experiment is a VW sedan.

I compete in Street A class with Memphis car audio, but ill like to try with the WO... but im not to good designing BP models.

Can you help me?
my subs are the 15PR104D, the T/S parameters are in here

http://www.memphiscaraudio.com/LiveImages/114/6/DocumentURL.pdf

thanx

Title: Re: Help with 4th order eclipse alum 12"s
Post by phd5000 on 05/15/06 at 16:34:07

http://www.audiogrid.com/audio/

heres the free program i used to run my t/s and it came out really close to waht the manufacter said...

member that woofer has a .16 displacment ;)