Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
SUPPORT FORUMS FOR DECWARE SPEAKER PLANS >> Deathbox Support Forum >> DBK-212 Question
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1133525927

Message started by Dyloch on 12/02/05 at 11:18:47

Title: DBK-212 Question
Post by Dyloch on 12/02/05 at 11:18:47

Just a question but will the 12 in DB work well with the DMH108B woofers? I know it's designed for 12 in subs, but I would like to put the Decware drivers in it and wonder if they will perform well in the box or do I have to build the 10 in box?

TIA
Dwight

Title: Re: DBK-212 Question
Post by DirtDawg on 12/02/05 at 11:44:33

Put a 10" in the DBK10 and a 12" or two in the DBK212. ;D

Read this and it should be more clear.

MOD:
I haven't tried it your way, but I believe there are some very serious reasons to use Steve's designs unaltered. If you alter the design before you start you will have no way of knowing what to expect from your efforts.

Title: Re: DBK-212 Question
Post by gexter on 12/02/05 at 13:16:22

I second that!

If you don't build it the way it is designed first you are missing the point of a good design.

I think its hard to improve steves design overall. you may like your version but steves is pretty hard to beat across the board.

until I hear others mods I reserve my opinion that someones mods are better next to steves original design.

You could find a better driver but your still sticking with Steves parameters.

got to admit its fun sometimes

:)

Title: Re: DBK-212 Question
Post by DirtDawg on 12/02/05 at 14:37:53

If you just like the look of the really sexy port in the DB212, I don't know why you couldn't make that port work fine in a 10" DB, but I haven't tried that either. ???

Title: Re: DBK-212 Question
Post by Dyloch on 12/03/05 at 11:32:30

Thankx for the replies Gents. Actually I am building the box to Steve's specs, I was just wondering if the 10" Decware drivers would make proper use of the box. I like the Desware drivers but they do not have anything in 12 inch is all :)

Title: Re: DBK-212 Question
Post by J_Rock on 12/03/05 at 16:10:28

WHat they are trying to say is that the Deathbox was originally designed for 10 inch woofers, the DB10.

Steve later realized a need for a 12 inch model and created the DB12.

If you have a ten inch woofer, build the DB10. Otherwise for 12s, the DB12. You shouldn't ahve to change anyhting to use either of the two size drivers.

Title: Re: DBK-212 Question
Post by J_Rock on 12/03/05 at 16:11:47

And if you are just wondering if the recommended drivers for the DB10 will work. I would assume thats why they are recommended.

So yes the decware 10 inchers in a DB 10 should work.