|
Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl SUPPORT FORUMS FOR DECWARE SPEAKER PLANS >> Deathbox Support Forum >> Orion HCCA in a Deathbox https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1133488026 Message started by CaptHookLV on 12/02/05 at 00:47:06 |
|
Title: Orion HCCA in a Deathbox Post by CaptHookLV on 12/02/05 at 00:47:06 Has anyone tried putting an Orion HCCA 12 in a deathbox yet? I have 2 laying around and was getting ready to try it. When these were in a ported box they busted out 150.1 db at an spl drag in San Diego. |
|
Title: Re: Orion HCCA in a Deathbox Post by Adrian D. on 12/02/05 at 14:09:48 i haven't used that particular driver, but if it's not free-air, it will work. i'm not sure if you'll hit the same spl with iso loading. actually if the iso group gets the same power you'll hit 3db lower compared to a single driver getting the same power. i think that if spl is you goal you should try either 2 DB12s or one wicked one with taller panels and angled baffles. |
|
Title: Re: Orion HCCA in a Deathbox Post by CaptHookLV on 12/02/05 at 20:27:34 I am not looking for spl. Just loud enough to hear over my 38"" super swampers bouncing down the road. I have an Orion 1200d mono block to pump the woofer. I am only going to use 1 woofer. does it matter which side of the baffle I put the woofer? |
|
Title: Re: Orion HCCA in a Deathbox Post by J_Rock on 12/02/05 at 22:07:39 not really, mainly for increaseing volume of the sealed portion. |
|
Title: Re: Orion HCCA in a Deathbox Post by 60ndown on 12/02/05 at 22:55:03 if you use both orions clamshelled in 1 death box, it will get stupid low and stupid loud and stupid tight. ;D |
|
Title: Re: Orion HCCA in a Deathbox Post by Adrian D. on 12/03/05 at 11:47:25 Quote:
now that's "stupid" :D Quote:
|
|
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |