Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
SUPPORT FORUMS FOR DECWARE SPEAKER PLANS >> Wicked One Support Forum >> wicked one-half
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1133249319
Message started by lunarlab on 11/29/05 at 06:28:39

Title: wicked one-half
Post by lunarlab on 11/29/05 at 06:28:39
New project from lunarlab.... http://lunarlab.greenbtn.com/music/pics/wonehalf.jpg

Title: Re: wicked one-half
Post by BigAir on 11/29/05 at 08:46:40
That would be a little smaller than a Wicked One-Third.

Title: Re: wicked one-half
Post by lunarlab on 11/29/05 at 10:13:30

BigAir wrote on 11/29/05 at 08:46:40:
That would be a little smaller than a Wicked One-Third.

ya it's actually one third in size.....but half the cone area...so one half.  Also I used 4 x 2 x 1 rather than 8 x 4 x 2 when I mesured it out, also half.... It makes the horn larger in ratio to the boxes but I wanted a smaller volume for my smaller drivers.  

Title: Re: wicked one-half
Post by 60ndown on 11/29/05 at 14:54:48
been there done that, great h.t. sub ;)

Title: Re: wicked one-half
Post by BigAir on 11/30/05 at 04:30:11
Hey 60,
I've been meaning to ask you about one of the bends in your WO24.  The second bend appears to have an overhang on both sides.  Is that the way it's supposed to be?  It seems like that would make the horn taper inconsitent and throw things off quite a bit.  

Title: Re: wicked one-half
Post by 60ndown on 11/30/05 at 14:28:43

BigAir wrote on 11/30/05 at 04:30:11:
Hey 60,
I've been meaning to ask you about one of the bends in your WO24.  The second bend appears to have an overhang on both sides.  Is that the way it's supposed to be?  It seems like that would make the horn taper inconsitent and throw things off quite a bit.  


yep its meant to be there, if and when you buy the plans ($40) you will see. and i reccomend buying them, best sub i have ever heard, been useing my normal sized one for almost 2 years and it NEVER dissapoints, and regularly supprises me with its ability to reveal whats actually on the low end. and the one above is a 21 not a 24, an experiment i threw together a bit roughly, i realised 3/4 of the way thru that id missed some of the lines by and inch or more :( but it still makes a sweet h.t. sub ;D 6.5 inch drivers, gets low and accurate-

Title: Re: wicked one-half
Post by BigAir on 11/30/05 at 15:34:22
Cool.  Thanks for the inspiration.  

Forums » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.