Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
AUDIO FORUMS >> TROUBLESHOOTING >> No output - VU meters completely flat
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1780061166

Message started by mike allums on 05/29/26 at 14:26:06

Title: No output - VU meters completely flat
Post by mike allums on 05/29/26 at 14:26:06

Woke up this morning, grabbed a cup of coffee and powdered up my SE84UFO2.2 and put an LP on. No sound. Checked all the usual suspects and then noticed the VU meters were flat. The tubes appear fine, I have the amp connected to a decent power conditioner (power not the issue). I am going to call later this morning as I suspect this baby is going into the Decware shop, but just wondering if anyone else has had a similar issue. Cheers!

Title: Re: No output - VU meters completely flat
Post by Steve Deckert on 05/29/26 at 15:03:07

Any time someone has a problem like this, rather than wait to make a call or email and wait for a response, go to our tech support page:

https://www.decwareproducts.com/techsupport

It will tell you that you have a blown rectifier tube that needs replaced despite it lighting up.

Title: Re: No output - VU meters completely flat
Post by mike allums on 05/29/26 at 15:11:22

Thank you Steve. I really appreciate your prompt attention. Cheers!