Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl SPEAKER FORUMS >> Lii Song Drivers >> Question about Lii W15 https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1759069929 Message started by mcskog on 09/28/25 at 15:32:09 |
Title: Question about Lii W15 Post by mcskog on 09/28/25 at 15:32:09 I know some of you power the W15 with a Crown XLS 1002. Could you explain how you have it wired please. Thanks! |
Title: Re: Question about Lii W15 Post by MM on 09/28/25 at 15:58:57 I used to power my W15’s with a Crown. If you are running stereo W15’s then it is the same as any other amp - reds to (+) and blacks to (-). If you are bridging to one W15 then you will use both red terminals on the amp and run one to the W15 (+) and the other to W15 (-), then go into the amp menu and set it to Bridge mode. Try swapping connections on the speaker, meaning try both in-phase and out of phase to see which sounds better for your W15 placement in relation to your primary speakers. |
Title: Re: Question about Lii W15 Post by mcskog on 09/28/25 at 17:59:56 Thanks for the info. |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |