Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
AUDIO FORUMS >> General Discussion and Support >> Zrock with a solid state amp
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1752954345

Message started by JohnBiv on 07/19/25 at 20:45:45

Title: Zrock with a solid state amp
Post by JohnBiv on 07/19/25 at 20:45:45

Hi, all, would a Zrock3 play nicely with a solid state amp, specifically a parasound halo integrated amp. I'm not an electrical engineer so I don't know anything about impedance matching, etc. Has anybody done this? What can I expect?

Title: Re: Zrock with a solid state amp
Post by CAJames on 07/20/25 at 01:29:23

I don't know specifically about the parasound halo but pre-Decware I always had a tube preamp in front of my solid state amps. The Decware product page says:

Will Drive Preamps or amplifiers with input impedances of 24K ~ 200K

So check the specs for you amp if you're worried.

Title: Re: Zrock with a solid state amp
Post by Ed on 07/22/25 at 18:26:20

I have played a ZStage and ZRock2 with ADCOM amps and they play great together. Currently I have my ZR2 in with my Ps Audio BHK250 and it makes a big difference. I would not hesitate. Good Luck.