Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
CABLE FORUMS >> DHC Silver Teflon Power Cords >> DHC3 - Which Component?
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1710820750

Message started by bloodlemons on 03/19/24 at 04:59:09

Title: DHC3 - Which Component?
Post by bloodlemons on 03/19/24 at 04:59:09

As of tomorrow, I'll have a ZMA, ZP3 and CSP3. I have three DHC2 cables and a recently acquired DHC3. I'm wondering which component will be best served by the DHC3. Any experience or opinions on the topic out there?

Title: Re: DHC3 - Which Component?
Post by Lon on 03/19/24 at 09:56:55

I would start with the DHC-3 on the power amp. And then play around with it in each component. . . but I think it may best serve the amp.

Title: Re: DHC3 - Which Component?
Post by bloodlemons on 03/22/24 at 20:37:39

That is what I was thinking too. Thank you for the response!

Title: Re: DHC3 - Which Component?
Post by DanG on 01/16/25 at 18:12:30

I purchased one DHC3. I was using DHC1 everywhere else.

I tried the DHC3 first on the amp, SE84UFO, and then I tried it on the CD player. I felt there were improvements both ways.

If I could only have only one DHC3 I'd probably place it with the amp. But once I heard it on the source, too, I suspected I had to have it on both amp and source. So I purchased another DHC3. I'm glad I did.

This is some of the best bang-for-buck improvement in my system. Improved detail on the instruments. Better overall sense of the soundstage. Better location within the soundstage. A surprising improvement in depth (and front/back location) in the soundstage.

THE DHC3 is heavier and stiffer than the DHC1, but I was able to replace all my DHC1 with DHC3. It's made a big difference, improved things in ways I didn't expect. I'm very happy I went for the upgrade to DHC3.

Title: Re: DHC3 - Which Component?
Post by Flyr on 04/29/25 at 04:20:23

I installed 2 DHC3 from My DAC and ZMA.

immediate improvement to my whole system was not what I was expecting.

I'm going to replace the remaining XLRs with these really great cable's.

Thanks Steve.