Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
OLDER DECWARE GEAR SUPPORT >> SE34I.5, SE34I.4, SE34I.3, SE34I.2 >> new se341.2
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1141262075

Message started by sickboymech5 on 03/02/06 at 00:14:35

Title: new se341.2
Post by sickboymech5 on 03/02/06 at 00:14:35

Does anyone know why there is no bias switch or an extra set of speaker outs on the new se-341.2?

Title: Re: new se341.2
Post by teepeeworks on 03/04/06 at 16:39:54

Sickboymech5,

The SE34-I.2 only has one tube output per channel so there is only one set of binding posts needed.

The amp no longer has a bias switch that changes the voltage in the 2 driver stages used in the old SE34-I.

The new amp uses a single tube now in an SRPP configuration.

The amp still does have a switch for the cathode bypass caps which will change the sound for you.

Take care,

Corey