Welcome, Guest. Please
Login
or
Register
04/26/24 at 00:30:40
Forums
›
AUDIO FORUMS
›
General Discussion and Support
‹
Previous topic
|
Next topic
›
Pages: 1
Matching a Sugden A21SE with Tube Tots (Read 895 times)
Jay73
Verified Member
Posts: 4
Matching a Sugden A21SE with Tube Tots
03/15/22 at 22:28:56
Hello All,
I have a Sugden A21SE Integrated Amp.
Do you think the new Tube Tots would be a good match?
I know the Tots are more for Tube Amp rated at 30 watts or less.
The Sugden is Pure Class A SS at 30 watts at 8-ohm or 40 watts at 4-ohms.
I believe the Tots are 4-ohms when using the tie rods.
Any feedback on this combination?
Back to top
IP Logged
Steve Deckert
Administrator
If the 1st watt
sucks why continue?
Posts: 6246
Re: Matching a Sugden A21SE with Tube Tots
Reply #1 -
03/16/22 at 04:45:02
Hi Jay,
I should be a good combination. The predicted higher damping of the amp will probably let you take them to a bit higher volumes than the tube amp, but at the same time have a stiffer speed limit if you know what I mean so as long as you don't get reckless it should be a rather great pairing.
Steve
Back to top
IP Logged
Jay73
Verified Member
Posts: 4
Re: Matching a Sugden A21SE with Tube Tots
Reply #2 -
03/16/22 at 17:15:08
Hello Steve,
Thank You for chimming in and providing your recommendation.
Can I ask, is there a long wait time right now for these speakers?
Also, which speaker stands do you recommend?
Thanks
Jay
Back to top
IP Logged
Pages: 1
Forums
›
AUDIO FORUMS
›
General Discussion and Support
‹
Previous topic
|
Next topic
›
UPLOAD IMAGES HERE
Forums
» Powered by
YaBB 2.2.2
!
YaBB
© 2000-2008. All Rights Reserved.