Welcome, Guest. Please Login or Register
Decware Audio Forums
04/19/24 at 22:36:30 




Forums › EQUIPMENT FORUMS › SE84UFO2 ‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
question about hi/low impedance switch (Read 1744 times)
grfdrums
Verified Member
**




Posts: 5
question about hi/low impedance switch
02/03/22 at 18:00:27  
Hello,

Somewhere I read that with the hi/lo impedance switches on this amp, one position is for 2-6 ohm speakers, and the other is for 6-16 ohm speakers.

The switches toggle from 'front to back'.  Can anyone tell me which position is which?  

My speakers are 8 ohms.  

Thanks,
Gunnar
Back to top
 
 
VPI Classic Signature / Ortofon 2M Black / ZP3 / KAB mono switch / SE84UFO2.1 / Lii Audio F-15 DIY open baffles / Torus Tot Mini isolation transformer / Blue Jeans Cable LC-1 interconnects / Blue Jeans Cable BJC 10 speaker cables
  IP Logged
Lin
Ex Member
Re: question about hi/low impedance switch
Reply #1 - 02/03/22 at 18:41:46  
From the owners manual:

"There is a HI / LO switch next to each pair of speaker jacks on the
amplifier. This is used to match the amplifier to a given loudspeaker
load. It is operated while music is playing and selected by ear for the
best sound. The amplifier will work fine with the HI / LO switch in
either position regardless of speaker load, however each setting will
make your speaker sound different or perform differently. Choose the
setting that you like the best and revisit the setting often to make sure
you didn’t just choose one position over the other because it sounded
better with the particular recording you were listening to when you
made the choice."
Back to top
 
 
  IP Logged
Pages: 1
Send Topic Print
Forums › EQUIPMENT FORUMS › SE84UFO2 ‹ Previous topic | Next topic ›

UPLOAD IMAGES HERE





Forums » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.


Source Forge