Mannytheseacow
Ex Member
|
I just replaced the pot and it seems smooth when I test it. I rechecked all the solder joints to be sure that wasn’t the issue either. I was able to trace it back to the 47k resistor, when I put a volt meter to ground on the tube pin 6 side of the resistor that channel comes back. Could it be the resistor is damaged but intermittently working? Sorry, I’m definitely an electronics newbie. A couple of other things I’ve noticed- maybe it’s just me but the left side power tube doesn’t appear to glow as brightly as the right, and when I shut it down the left side distorts as it fades out. I should also note that when I say I lose the left channel, it isn’t totally gone, but sounds still comes out very faintly.
|