Welcome, Guest. Please Login or Register
Decware Audio Forums
04/20/24 at 06:21:19 




Forums › AUDIO FORUMS › General Discussion and Support ‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Using 2 Zen Triode integrated amps (Read 1385 times)
Paqua
Verified Member
**




Posts: 3
Using 2 Zen Triode integrated amps
09/14/21 at 04:40:18  
New audio guy here. If you buy 2 of these 1 for each speaker how would you do that? Do you need a pre-amp to run all the inputs etc? Id like to run these with Cornwall IVs or Tekton Perfect SET 15s. Any help would appreciated
Back to top
 
 
  IP Logged
Paqua
Verified Member
**




Posts: 3
Re: Using 2 Zen Triode integrated amps
Reply #1 - 09/14/21 at 06:06:02  
ok ill go see if i can find where that is
Back to top
 
 
  IP Logged
Paqua
Verified Member
**




Posts: 3
Re: Using 2 Zen Triode integrated amps
Reply #2 - 09/14/21 at 06:14:22  
Ok page 17 was warranty info however early on in the manual it talks about bridging. By connecting left positive to right negative. However it says nothing how to operate the amp. Where to plug in the external equipment like a dac or turntable amp. Which unit would be the volume control?
Back to top
 
 
  IP Logged
Lin
Ex Member
Re: Using 2 Zen Triode integrated amps
Reply #3 - 09/14/21 at 17:48:14  
https://www.decware.com/newsite/SE84CKC.html

If you go to the link above and scroll down to the link to download the manual you will find instructions (page 17) on how to use them as mono amps.
Back to top
 
 
  IP Logged
Pages: 1
Send Topic Print
Forums › AUDIO FORUMS › General Discussion and Support ‹ Previous topic | Next topic ›

UPLOAD IMAGES HERE





Forums » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.


Source Forge