Welcome, Guest. Please Login or Register
Decware Audio Forums
04/19/24 at 18:42:44 




Forums › EQUIPMENT FORUMS › SE84UFO ‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Switch Selection for Speakers (Read 1972 times)
jcmusic
Verified Member
**




Posts: 39
Switch Selection for Speakers
02/03/21 at 11:20:47  
Ok so you have two switches are the two switches suppose to be in the same position creating two different sounds, or can they be in different positions creating four different sounds?
Back to top
 
 
  IP Logged
Lon
Seasoned Member
****


"Love without
guts is
worthless!"
Philip K. Dick

Posts: 23462
Re: Switch Selection for Speakers
Reply #1 - 02/03/21 at 13:28:13  
I would use both switches in the same position . . . that way each speaker is fed the same "signal" . . . .
Back to top
 
 
HR-1,ZTPRE,ZBIT,ZROCK2,SEWE300B,CSP3-25mod,Taboo MkIV;Rega RP3 all GrooveTracer mods;PSAudio:PST+DSD,P15,NPC,PowerBases,AC-12 pwr cbls,Reference spkrcbls;Mapleshade SamsonV3;VooDoo:Cremona+Amati interconnects, IsoPods; headphones:Sennheiser HD800S,ZMF Ori,Oppo PM1
  IP Logged
CAJames
Seasoned Member
****


"I've run every
red light on memory
lane."

Posts: 1652
Re: Switch Selection for Speakers
Reply #2 - 02/03/21 at 15:04:58  
There is certainly no harm in having the switches in different positions but I agree with Lon that it makes sense to choose one or the other. I'll say however in my system (that can resolve significant differences between fuses and cables) I hear no difference changing the impedance switch.
Back to top
 
 
[FOOBAR2000 | Jay's CDT2 MRK3] -> Denafrips Terminator 2 + Gaia
Sumiko Pearwood -> Mapleknoll Athena -> Luxman SUT -> Maple-tree Phono 3E
Woo WA22 -> 2x UFO25s, balanced monos
Omega SAM , Hifiman Arya, Senn HD-650
  IP Logged
Lin
Ex Member
Re: Switch Selection for Speakers
Reply #3 - 02/03/21 at 16:40:32  
Do you use the amp to drive just the tweeters?
Back to top
 
 
  IP Logged
jcmusic
Verified Member
**




Posts: 39
Re: Switch Selection for Speakers
Reply #4 - 02/03/21 at 23:22:33  
No I use the amp to drive just the mid drivers. I do hear a difference when I switch them and I thought the same that both should be in the same position, I just wanted to be sure thanks guys...
Back to top
 
 
  IP Logged
Pages: 1
Send Topic Print
Forums › EQUIPMENT FORUMS › SE84UFO ‹ Previous topic | Next topic ›

UPLOAD IMAGES HERE





Forums » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.


Source Forge