Welcome, Guest. Please Login or Register
Decware Audio Forums
03/29/24 at 03:27:22 




Pages: 1
Send Topic Print
ZBox Input Level (Read 4222 times)
designtaylor
Verified Member
**




Posts: 19
ZBox Input Level
06/08/20 at 22:37:43
 
Recently became the proud owner of a ZBox. I first tried it in my headphone system with my DAC feeding directly into it and then it into my amp. Sounded great. Moved it into my main 2-channel set up and the sound got rough. It feels like it is being overdriven or something. It is now connected to a Cambridge CXN V2 streamer and then into the preamp. Could the output on the streamer be too much for the ZBox? I put it later in the chain but that caused even more issues.
Back to top
 
 
  IP Logged
Archie
Seasoned Member
****




Posts: 2731
Re: ZBox Input Level
Reply #1 - 06/08/20 at 22:49:50
 
You can try searching the Forum.  I think the input voltage limit is given somewhere.  I sort of remember 4 volts but don't take my word on it.

Look at this post by Steve:  https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1265908137/0#0
Back to top
 
 

ZLC
Technics 1200G TT w/ Ortofon Jubilee MC cart
ZMC1
ZP3 (25th A Mods)
ZR2 (25th A Mods)
CSP3 (25th A mods)
ZMA (25th A mods)
Homemade Big Betsy Speakers (F15s)
Silver Cabling
DIY Isolation platforms under amps & TT.
  IP Logged
designtaylor
Verified Member
**




Posts: 19
Re: ZBox Input Level
Reply #2 - 06/08/20 at 22:52:28
 
Thanks Archie. I can't believe that the streamer is putting out more than that. Wonder if I'm barking up the wrong tree.
Back to top
 
 
  IP Logged
Archie
Seasoned Member
****




Posts: 2731
Re: ZBox Input Level
Reply #3 - 06/08/20 at 22:59:18
 
Back to top
 
 

ZLC
Technics 1200G TT w/ Ortofon Jubilee MC cart
ZMC1
ZP3 (25th A Mods)
ZR2 (25th A Mods)
CSP3 (25th A mods)
ZMA (25th A mods)
Homemade Big Betsy Speakers (F15s)
Silver Cabling
DIY Isolation platforms under amps & TT.
  IP Logged
designtaylor
Verified Member
**




Posts: 19
Re: ZBox Input Level
Reply #4 - 06/09/20 at 00:45:48
 
Great info! Thanks
Back to top
 
 
  IP Logged
designtaylor
Verified Member
**




Posts: 19
Re: ZBox Input Level
Reply #5 - 06/09/20 at 03:04:58
 
Well I swapped what I believe was the stock tube (second owner, no markings) with a JJ ECC82 / 12AU7 that I had on hand and that seems to have resolved the issue. The ZBOX is sitting in between the steamer and my preamp. Cranked up it is the quietest of my sources but that's ok as I've got plenty of headroom.

Seems like I'll be focusing on the 12AU7 for my tube rolling adventures. Recommendations welcome!
Back to top
 
 
  IP Logged
Pages: 1
Send Topic Print