PM sent Randy.
Hi Jeff, nice suggestions. I checked out the Dayton SA-1000. I do not have RCA line outs for this units line inputs. Also, a lot of power there, for my smaller room.
I loved my CSP3 with Jupiter Caps + it had the Sub RCA out. However, I've gone the purest route....and love my ZMA solo! +, my NOS Platinum input tubes....shine through the best this way too.
So, how do I get some weight back/when I want it, in lieu of my CSP3?....BINGO....OB out of the Box (colorations)! ......you guys have been enjoying. Maybe, I add a 2nd,...but I will start with one. Randy let me know, if I wanted the Augie(s) later....I can purchase while supplies last and the same cut out and holes....I will already have in my existing baffle.
I'm going to go with one Alpha Eminence 15", fully finished OB, stained in Walnut from Randy, with a Dayton SPA250..../156 watts RMS 8 ohm, into the 8 ohm Alpha.
https://www.parts-express.com/pedocs/manuals/300-803--dayton-audio-spa250-manual...Randy's, wonderful OB Bass 15" Alpha Eminence....will be in the house soon!
Listening Room:
Room Treatments from Michael Green & Home Brew
Sony as Transport (DVP-NS57P)
Illuminati D-60 Digital Coax IC
Shunyata Research Zitron Alpha Digital Power Cord to ZDSD
{Extremely Significant}
Decware ZDSD DAC / Recorder ++
***************************************************************
W/Steve's Output Transformer's/kicking to the Curb quite a few superb DAC'S!
***************************************************************
(@ -20 Ref Level, 0.0 Input volume and @ 16/192)
WBT-0102Ag RCA Kimber Select KS1030 ~.75 meter
Decware Zen Mystery Amplifier
~BIASED at *56* mA~
(NOS/Platinum/Mullard E188CC/7308's in my A12 an B12 Input positions Cryogenic~NOS/Platinum/Telefunken E88CC for Inverter Tubes~NOS RCA 0A3's & matched Quad/Tung-Sol KT66's)
ZMA adjusted at 20% to 30-40% max ~ from 0 Gain
***************************************************
Kimber Select KS6063 Speaker Cable 8ft WBT-0681-Ag Spades
***************************************************
Kimber 8TC new/white & clear jacket/to remind me of how fluid/timbre correct and good the KS6063 are!
Decware DM947 Monoliths/4 ohm (Midrange modification/Wave Guide)
w/PX Clarity Caps ......Duelund, StealthCap or Mundorf MCap Supremes possibly pending.....
enjoying from 8 ohm ZMA Taps
Acoustic Zen Adagio - Black Pearl (Modified)
.....from 8 ohm ZMA Taps.
Acoustic Zen Adagio's x-over's Modified/Full Range with Mundorf MCap Supremes-single Cap to each Tweeter/4.5k cross
(Gutted: 3kHz/18dB/Octave, Linkwitz/Riley Crossovers....with all crappy parts = gone)
XLO Pro Power Cord to ZMA
PS Audio P3 Power Plant / Pangea AC-9SE from wall to P3
(Transport and ZDSD, Regenerated/*120*~ Multiwave off...ZMA on High Current Output)
++ ZDSD DAC, kicked to the Curb: Auralic Vega, PS Audio PWT & PWD, PS Audio Direct Stream DAC, Chord Qute, NAD M51 (twice) & Schiit Yggdrasil.
~NOS Platinum Tubes from Upscale Audio/Kevin:
(Great Britain) Mullard 7308/E188CC ~ 2 pair (both pair Cryogenic)
(Germany) Telefunken E88CC ~ 1 pair (painfully expensive/worth it)
(US/Great Britain) Ediswan CV2492/6922 ~ 2 pair (one pair Cryogenic)
(Hungary) Tungsram 6922/E88CC ~ 1 pair
(Hungary) Tungsram PCC88/7DJ8 ~ 1 pair.
From Cryoset:
(Russia) 6N23N/P-EB ~ 2 pair
(Russia) 6N23P's ~ 2 pair/came with ZMA.