Welcome, Guest. Please Login or Register
Decware Audio Forums
03/28/24 at 20:23:29 




Pages: 1
Send Topic Print
Bias wiring for switch on SE84C (Read 115 times)
jgs
Verified Member
**




Posts: 1
Bias wiring for switch on SE84C
11/06/15 at 17:21:21
 
I inherited (so to speak) an 84C that was an earlier kit I assume.  The previous owner did about the worst job I have ever seen.  Wired wrong, not completed and broken lead on one output transformer.  I found a schematic on line and have totally disassembled the unit and wired everything according to schematic and the tutorial videos on You Tube.  Also fixed the output transformer.  Where I am stumped is the bias switch wiring.  Can anyone provide a layout diagram in addition to the schematic?  Any help would be appreciated.  This is a black chassis unit.  No serial # because bottom plate is missing.  It did include the wooden box for chassis.  Also, the #8 video on You Tube is not available due to some copy right problem?!?!  Thanks,  Joe
Back to top
 
 
  IP Logged
Pages: 1
Send Topic Print