Welcome, Guest. Please Login or Register
Decware Audio Forums
04/20/24 at 08:16:50 




Forums › OLDER DECWARE GEAR SUPPORT › TORII MK III ‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Impedance switch, which position for 4 or 8 ohms (Read 3618 times)
Valentin
Verified Member
**




Posts: 12
Impedance switch, which position for 4 or 8 ohms
07/21/13 at 05:12:28  
Hi, I own the TOR II Mk 2 amps and I wonder, which is the 4 ohm or 8 ohm position of the impedance switch at the back, next to the binding posts. Is 4 ohm toggled the switch towards the front (where the transformers are), or towards the back. I wonder, because I can hear a considerable difference between the two positions and I want to have certanty about which impedance I am using. Thank you for helping me.
Back to top
 
 
  IP Logged
Lon
Seasoned Member
****


"Love without
guts is
worthless!"
Philip K. Dick

Posts: 23464
Re: Impedance switch, which position for 4 or 8 ohms
Reply #1 - 07/21/13 at 11:05:50  
Use the one that sounds best! Smiley

I'm 99 percent sure that the 4 ohmn is with the switch towards the front.
Back to top
 
 
HR-1,ZTPRE,ZBIT,ZROCK2,SEWE300B,CSP3-25mod,Taboo MkIV;Rega RP3 all GrooveTracer mods;PSAudio:PST+DSD,P15,NPC,PowerBases,AC-12 pwr cbls,Reference spkrcbls;Mapleshade SamsonV3;VooDoo:Cremona+Amati interconnects, IsoPods; headphones:Sennheiser HD800S,ZMF Ori,Oppo PM1
  IP Logged
Pages: 1
Send Topic Print
Forums › OLDER DECWARE GEAR SUPPORT › TORII MK III ‹ Previous topic | Next topic ›

UPLOAD IMAGES HERE





Forums » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.


Source Forge