Welcome, Guest. Please Login or Register
Decware Audio Forums
04/25/24 at 12:07:59 




Forums › OLDER DECWARE GEAR SUPPORT › TABOO MK III ‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Re: Taboo MkIII + ZP3 (Read 4560 times)
Lon
Seasoned Member
****


"Love without
guts is
worthless!"
Philip K. Dick

Posts: 23517
Re: Taboo MkIII + ZP3
06/04/13 at 11:34:32  
Yes, I have a Torii Mk III and a ZP3. Excellent match. (Well, I use a CSP2+ in the chain as well, but I can't imagine the ZP3 wouldn't shine straight into the Torii, just can't do that currently in my set-up).

An excellent phono preamp and an excellent amp that work well together.
Back to top
 
 
HR-1,ZBIT,ZROCK2,SEWE300B,CSP3-25mod; Rega RP3 all GrooveTracer mods;PSAudio:PST+DSD, DAC Mk II, P15,NPC,PowerBases,AC-12 pwr cbls, Reference spkrcbls; Mapleshade SamsonV3; VooDoo:Cremona+Amati interconnects, IsoPods; headphones: Sennheiser HD800S,ZMF Ori,Oppo PM1
  IP Logged
JAG
Verified Member
**




Posts: 45
Re: Taboo MkIII + ZP3
Reply #1 - 06/04/13 at 18:39:09  
I have a Taboo Mk III + ZP3.  My source is an AR tt with a low output cartridge so I also have a Bob's Devices SUT in-line.  I probably have < 50 hours on the Mk III so I have not done any tube rolling yet.  I use it for headphones only, and I will say it is the real deal with LCD-2's and nearly so with HD800's.
Back to top
 
 
  IP Logged
OPR8R
Verified Member
**




Posts: 3
Re: Taboo MkIII + ZP3
Reply #2 - 06/05/13 at 05:59:53  
I'm thinking of adding the CSP2+ as well.  It's hard to imagine the ZP3 wouldn't be a good match, but it's helpful to hear it from those who've actually tried it.
Back to top
 
 
  IP Logged
Pages: 1
Send Topic Print
Forums › OLDER DECWARE GEAR SUPPORT › TABOO MK III ‹ Previous topic | Next topic ›

UPLOAD IMAGES HERE





Forums » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.


Source Forge