MarkBlair
|
I wrote to Steve about this a few days ago, but I still haven't heard anything back -- so I thought I'd throw this open to the forum.
I've had my new SE84C+ for just over two months, and intermittently (roughly 3-5 times so far) within the past week or so when I turn the power on (using the amp's power switch), nothing happens. And there's no apparent power applied to any of the tubes. In one case I had to turn the amp off and then back on (again, using the amp's power switch) something like 4 or 5 times before it then powered on.
Then, one time when it didn't power on, removing and re-inserting the rectifier tube then made it work the next time I flipped the power switch on.
So -- any ideas what could cause this? Even though the tube is still within the 90 day warranty, I don't want to send it back for exchange if this could be something else.
Any thoughts?
By the way, even though I have a very tiny bit of hum audible from my nearfield monitoring position of about 30" away with 90dB PMC TB2S+ speakers, this is a **great** sounding amp!
Mark Blair
|