Hajj
Ex Member
|
Here's mine First pic is a panoramic view of the room, shown in the middle is my listening position (where a laptop sits in the chair) Second pic is a closeup of the amp/preamp setup. The setup consists of a musicstreamer USB DAC playing mostly Flac files, into a zkit 4/5 then a Lighter note LDR attenuator into the SE34-I, out into a pair of audio nirvana super 12's in a 190 Liters BR boxes. I have a little problem with the setup's imaging, so if anyone has any suggestions, please don't hesitate to jump in. At this point any advice is welcome. The problem i'm facing is that with mid and low frequency sound imaging is perfect, very focused soundstage is deep, but with the higher frequencies (Crash cymbals, high pitched guitar solos) the imaging crumbles, and i hear the sounds in each speaker separately. As you can see, the room is relatively live, and the section to left of the listening position, to the left of the left speaker is made out of a concrete block bar with some extra space behind it. There seems a very consistent cutoff frequency at which imaging is lost, because when i'm listening to guitar solos, and as the guitar's sound goes from low to high, i can gear the image snap in and out. It's driving me nuts :( Btw, the room is 12x17 ft (the 12 ft being from right sidewall to the bar wall, there's an extra 5.5 ft from the bar wall to the left sidewall)
|