Forums - Testing SV83 Tubes

Welcome, Guest. Please Login or Register

04/25/24 at 06:36:35

Forums › OLDER DECWARE GEAR SUPPORT › SV83M and SV83S

‹ No topic | Next topic ›

Pages: 1

Testing SV83 Tubes (Read 15013 times)

jizosattva

Ex Member

Testing SV83 Tubes
12/14/09 at 20:40:57

I would like to test some of my SV83 tubes on my tube tester but my tester does not give settings to test the SV83. Is there a different tube out there that has equivalent pin, voltage, heat settings etc... that my tester gives settings for so that I can test my SV83s? I have seen info saying that the SV83 is equivalent to the 6P15P and the EL83. However, when looking up those tubes on my tester the set up numbers for each is different. Can anyone tell me if I could use the numbers of either one of these tubes to test the SV83?

Thanks all.

IP Logged

Rivieraranch Seasoned Member Posts: 2126	Re: Testing SV83 Tubes Reply #1 - 12/15/09 at 01:42:07 You need to specify which tester you have. Also, it strikes me that this question might be answered more quickly over on the Antique Radio Forums in the Test Equipment Discussion section.
Back to top	MINI TORII & ZROCK2 both anniversaried; 'Lil Audio F-15; TECHNICS SL1200MK2 KAB MODDED TT; ONKYO 6 DISC CD; MARANTZ 2226B; SCHIIT MULTIBIT DAC; SENNHEISER HD-580s IP Logged

jizosattva Ex Member	Re: Testing SV83 Tubes Reply #2 - 12/15/09 at 22:29:35 The Tester is a BK Precision 747B. Good idea about the radio forum. Thanks, PB
Back to top	IP Logged

Jason Senior Member Posts: 71	Re: Testing SV83 Tubes Reply #3 - 12/16/09 at 15:33:50 Same tester... I just test them as el84's, maybe a little less on the sesitivity dial to keep it on the meter. I compare readings to new tubes for a relative idea of their output. I know it's probably not correct so if anyone has better info I'd like it too. Same with 6n1p & 6n2p. Jason
Back to top	IP Logged

Pages: 1

Forums › OLDER DECWARE GEAR SUPPORT › SV83M and SV83S

‹ No topic | Next topic ›

UPLOAD IMAGES HERE