Welcome, Guest. Please Login or Register
Decware Audio Forums
04/23/24 at 09:28:22 




Pages: 1
Send Topic Print
Can I leave my ZKit1 amp on 24/7 ? (Read 7514 times)
Alan H
Ex Member



Can I leave my ZKit1 amp on 24/7 ?
10/03/09 at 20:10:30
 
From the HomeTheatreReview SE84C review linked to from the Review section here

"Decware recommends you leave the SE84C+ on 24/7"

The amps are related - so does this also apply to my kit1 ?
Back to top
 
 
  IP Logged
Alan H
Ex Member



Re: Can I leave my ZKit1 amp on 24/7 ?
Reply #1 - 10/05/09 at 23:22:04
 
Steve?
Back to top
 
 
  IP Logged
Steve Deckert
Administrator
*****


If the 1st watt
sucks why continue?

Posts: 6246
Re: Can I leave my ZKit1 amp on 24/7 ?
Reply #2 - 10/06/09 at 02:48:17
 
Hi Alan,

Actually that was a miss quote on their part.  I've never officially recommended leaving an amplifier on 24/7 simply because of safety issues when you're not home.  For example, if something WERE to short out, there might be a chance of fire.   I especially would be leery of recommending it on kits, or amps that we didn't build ourselves.

Now, as far as the amp is concerned, nothing will happen to it nor would there be any ill effects from leaving it on 24/7.  Many customers do it and have consequently recommended it to others on various forums.  As a test I ran an SE84C 24/7 for almost 6 years before one of the tired output tubes finally failed.

Steve
Back to top
 
 
WWW   IP Logged
Alan H
Ex Member



Re: Can I leave my ZKit1 amp on 24/7 ?
Reply #3 - 10/06/09 at 21:33:35
 
Thanks Steve.

I've noticed that the power transformer, despite being on top, gets hot. Sounds like this does not affect it's lifespan.

Having drilled a row of ventilation holes in my kit I'm reasonably confident it will not overheat.

So maybe not 24/7, but will not worry about extended periods where it is left on.
Back to top
 
 
  IP Logged
Lon
Seasoned Member
****


"Love without
guts is
worthless!"
Philip K. Dick

Posts: 23492
Re: Can I leave my ZKit1 amp on 24/7 ?
Reply #4 - 10/08/09 at 17:07:38
 
Allen,

Your tube life IS shortened if left on for a long time. Whenever I leave mine on for a long spell, and I often do, I run a cd on repeat and have the volume down really low. . . .
Back to top
 
 

HR-1,ZBIT,ZROCK2,SEWE300B,CSP3-25mod; Rega RP3 all GrooveTracer mods;PSAudio:PST+DSD, DAC Mk II, P15,NPC,PowerBases,AC-12 pwr cbls, Reference spkrcbls; Mapleshade SamsonV3; VooDoo:Cremona+Amati interconnects, IsoPods; headphones: Sennheiser HD800S,ZMF Ori,Oppo PM1
  IP Logged
Alan H
Ex Member



Re: Can I leave my ZKit1 amp on 24/7 ?
Reply #5 - 10/09/09 at 11:25:37
 
OK ... my gut feeling was that tube life would be shortened. Though presumably like a lightbulb, a lot of on/off is not good either.

Curious Lon - why does having a signal passing through the tubes make a difference?
Back to top
 
 
  IP Logged
Lon
Seasoned Member
****


"Love without
guts is
worthless!"
Philip K. Dick

Posts: 23492
Re: Can I leave my ZKit1 amp on 24/7 ?
Reply #6 - 10/09/09 at 18:13:15
 
I don't know---but that's what I've been told over the years. It may not be true?
Back to top
 
 

HR-1,ZBIT,ZROCK2,SEWE300B,CSP3-25mod; Rega RP3 all GrooveTracer mods;PSAudio:PST+DSD, DAC Mk II, P15,NPC,PowerBases,AC-12 pwr cbls, Reference spkrcbls; Mapleshade SamsonV3; VooDoo:Cremona+Amati interconnects, IsoPods; headphones: Sennheiser HD800S,ZMF Ori,Oppo PM1
  IP Logged
Pages: 1
Send Topic Print