Welcome, Guest. Please Login or Register
Decware Audio Forums
03/29/24 at 14:01:25 




Pages: 1
Send Topic Print
WinISD curves for HWK (Read 7499 times)
asiquis
Senior Member
***




Posts: 61
WinISD curves for HWK
02/11/08 at 15:44:55
 
Greetings,

Does anyone have winISD graphs for HWK's- 12/15/18??
And the driver you are using?

Ray
Back to top
 
 
  IP Logged
Adrian
Ex Member



Re: WinISD curves for HWK
Reply #1 - 02/12/08 at 19:18:14
 
I believe it's a bit tricky to simulate the House wrecker simply because of the large coupling chamber.
Back to top
 
 
  IP Logged
Bart_West-VL.
Ex Member



Re: WinISD curves for HWK
Reply #2 - 02/12/08 at 21:01:05
 
You can only simulate if you're using one baffle, when using both baffles...what Adrian says!
One baffle used = 6th order bandpass

So, take one driver or an iso-baric configuration and calculate the volume of both chambers from the plan.
Make sure to calculate the volume that the driver(s) is(are) taking up.

Now comes the fun part Undecided change the resonance frequency until the port dimensions fit the ones on the plan.
I could do this for you, but where would the fun be in that for you?!? Cheesy

btw, the outcome is the same for every driver, the box stays the same, the tuning stays the same.
But different drivers will give different sounds, because of there own characteristics.

Have fun! Wink

From there on, you can change the resonances by changing the ports dimensions, the same way as above.
Back to top
 
 
  IP Logged
asiquis
Senior Member
***




Posts: 61
Re: WinISD curves for HWK
Reply #3 - 02/13/08 at 01:05:55
 
mulţumiri, Danka, merci  :)
Ray
Back to top
 
 
  IP Logged
Adrian
Ex Member



Re: WinISD curves for HWK
Reply #4 - 03/02/08 at 12:16:02
 
Cu plăcere, you're welcome !
Back to top
 
 
  IP Logged
Pages: 1
Send Topic Print