ZYGI
|
Stephen,
If you haven't built the speakers yet, you might not understand this right off....When you look at the surface that is remaining, after the ovals are cut away from the "X" partitions there isn't much directly behind the driver, with that said, if you look once built, if they aren't already, just sliding the foam about an 1" to an 1 1/2" up and down (depending on which side of the driver you talking about), you'll see a significant amount of surface covered with the foam, whats not covered is minimal and causes no ill effects.
HDT's leaving here, do not have all the back wall, directly behind the driver covered, (like described above) there really is no need for it.
BobZ
|