Forums - 5R4WGA

Welcome, Guest. Please Login or Register

04/19/24 at 19:57:43

Forums › AUDIO FORUMS › Replacement Tubes

‹ Previous topic | Next topic ›

Pages: 1

5R4WGA (Read 1314 times)

RobLikesTubes Ex Member	5R4WGA 01/10/07 at 15:17:12 Can this tube be used in a C-Select as a 5u4 substitute ?
Back to top	IP Logged

Mike W

Ex Member

Re: 5R4WGA
Reply #1 - 01/10/07 at 17:04:52

The 5R4 is built somewhat like a 5U4, however the 5R4 operates at lower load currents. So yes it can be used but the term substitute should be used loosely.
I am sure someone who is more knowledgeable than me will weigh in on this one.

You will hear a difference. In one of my amps I actually prefer the 5R4 to the 5U4. Many Zen C owners like the sound of the 'Tater Masher' which is a 5R4WGB.

IP Logged

rayd

Ex Member

Re: 5R4WGA
Reply #2 - 01/10/07 at 21:31:56

Courtesy of Bo-(ead) :D from a past thread many moons ago:

Rectifier tubes for Zen Select: (Low voltage = mellower, less aggressive) -25v 5Y3 -15v 5R4, 5R4-G 0 Stock - 5U4-G 0 5U4-G, -GA, -GB [G=800ma-max, GA=900ma-max, GB=1000ma-max] +5v GZ32 (Mullards own, 5V4 substitute) +10v 5V4 +10v 5V4-G +10v 5V4-GA +30v 5AR4 / (GZ34) (Higher voltage = Dynamic, more aggressive)

IP Logged

rayd Ex Member	Re: 5R4WGA Reply #3 - 01/10/07 at 21:39:52 I tend to lean towards the RCA 5U4GB. Seem to listen to it the most. Just noticed I have an RCA 5R4GYB. I'll have to pop it in sometime and see how I like it. - Ray
Back to top	IP Logged

Chris K

Ex Member

Re: 5R4WGA
Reply #4 - 01/11/07 at 03:35:51

5R4 in a Select is not the same as using a 5R4 in a Zen "C".
Zen "C" is spec'd for 5Y3 and a 5R4 is a bump up in voltage.
In a "CS" or "Select" 5U4 is the spec'd rectifier and it is substantially higher voltage than the 5R4. So in that instance 5R4 would be a step down in terms of voltage. Not saying a step down in sound mind you. Just that my best guess is that 5R4 would "relax" a Select a little. I found though that in my Zen "C" 5R4WGB (masher) sounded the best of any rectifier.
If you want to maybe try a Mullard NOS GZ32. Some have said a 5AR4 would work in a Select but IMHO too much for a Select.

Corrected above: "CS" or "Select" oops!

IP Logged

selmerdave Ex Member	Re: 5R4WGA Reply #5 - 01/11/07 at 21:04:31 5R4WGA (RCA) is one of my favorite rectifiers for my Select EX. Dave
Back to top	IP Logged

Joel

Ex Member

Re: 5R4WGA
Reply #6 - 01/12/07 at 01:56:04

Just in case somebody is getting the "willies" about trying different rectifiers.

From the dark ages -

Started by sargon | Post by Steve Deckert
There is an error on the Schematic from the standpoint that we ship the SE84C with a 5Y3GT. It is compatible with 5Y3GT, 5AR4, 5U4. The resistors on pin two are lower values and a different type on the SE84CS not due to voltage differences but to achieve the desired signature.

Joel

IP Logged

Chris K

Ex Member

Re: 5R4WGA
Reply #7 - 01/12/07 at 18:04:08

SO Joel that would mean different rectifier + given resistor value would = different signature. All true but even Ed V. and Steve D. say a 5AR4 is too high a voltage for a stock "C". It will do OK in a "Select" though. Oh I'm not saying anything would happen in a "C" with a 5AR4 but if I still had my "C" I would NOT put in a 5AR4 ever. A Zen CS Select is a different story. The power supply component values are different enough to take advantage of the 5U4. 5Y3 sound very good in a "C" not in a Select though and not many use that low V in a Select.

IP Logged

Joel Ex Member	Re: 5R4WGA Reply #8 - 01/12/07 at 19:45:09 Those were Steves' words, not mine, saying a 5AR4 was okay in a C. I have used them in my CEX. Joel
Back to top	IP Logged

Andy831 Seasoned Member Posts: 108	Re: 5R4WGA Reply #9 - 02/16/07 at 07:20:09 I have now tried the 5U4GC, and also the GZ32 (Mullard) and I prefer the GZ32 in my select. Has anyone tried a 274B ? My "new to me" 20 month old Select is apparently shipping to me with this Rectifier tube, I await its arrival with interest [smiley=cloud9.gif]
Back to top	Nottingham Analogue Spacedeck with Spacearm with Denon DL301mk 2 Cart. Decware ZP2 Sony CDP X-3000 ES Decware CSP Pre amp Two Decware SE84CS strapped in parallel Tannoy Grf Memory Speakers IP Logged

veryoldcat

Seasoned Member

dam*ed if you do,
and dam*ed if you
don't

Posts: 373

Re: 5R4WGA
Reply #10 - 02/16/07 at 07:47:40

Some folks have raved about the 274b in a Select, but I haven't tried it. If recollection serves, there is some chance the 274b won't live as long as other rectifiers in the CS, but an expert is needed to confirm this.

My personal dead center favorite is the Mullard gz32! I've tried quite a few 5u4's of excellent lineage, and they're good, but clearly not as liquid as the the gz32. The 5u4's are much more aggressive sounding, and more fatiguing to my ear.

My second best fav to the gz32 is the RCA 5v4 (electrically similar). Not as liquid as the gz32 but darn nice.

Don't care much for the 5r4 or 5ar4 in the CS (or my csp either).

Karl

SE84CS (vcapped), CSP, zbox, Dec685, ZP 1.0, Sota tt/Well-Tempered Arm/V15XMR, Parker 98's, Parker Audio *Power Chords*, cat 6 wires, OSX; a garage sale of other stuff...

IP Logged

Pages: 1

Forums › AUDIO FORUMS › Replacement Tubes

‹ Previous topic | Next topic ›

UPLOAD IMAGES HERE