Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
AUDIO FORUMS >> D.I.Y. >> Zen Kit # 1 Schematic
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1573512653

Message started by Anthonyinnz on 11/11/19 at 22:50:53

Title: Zen Kit # 1 Schematic
Post by Anthonyinnz on 11/11/19 at 22:50:53

Hi! First post ever. New to Decware and want to try building this point to point. The 6p15p's look interesting : )
Looking at the schematic (revision 3/10/19) and got concerned as to the pinouts suggested for the power supply and outputs for the 6p15p on the schematic: 2/7 on the filaments should rather be 4/5? And, on the 6p15p pins 6/8 are not connected, but theyre connected on the schematic...so, should 6 on the schematic in fact be pin 7? And, should 8 be pin 9?
Any help appreciated : )

Title: Re: Zen Kit # 1 Schematic
Post by funch on 11/12/19 at 01:22:52

You are correct sir. Pins 4/5 are heater on both input and output tubes.

Pins 6/8 are not used on the 6N15P. Pin 7 is output, and there is a resistor between pins 7/9.

Title: Re: Zen Kit # 1 Schematic
Post by Anthonyinnz on 11/12/19 at 01:39:51

Most excellent! Thanks funch.
I will go ahead and order the remaining parts : )

Title: Re: Zen Kit # 1 Schematic
Post by Anthonyinnz on 11/14/19 at 02:18:37

Hi Funch,
Sorry cant post pm's yet, havn't reached 5 posts. Haha. Will soon i suppose.
Yes, am keen to check out your build. Sounds interesting.
I am getting my transformers made here; this is a difficult part of being in NZ: components and shipping etc. Just waiting for a price.

Title: Re: Zen Kit # 1 Schematic
Post by Anthonyinnz on 11/14/19 at 21:05:29

Hi again Funch. Have you used the transformer supplier before?

Title: Re: Zen Kit # 1 Schematic
Post by Anthonyinnz on 11/14/19 at 21:06:57

The one you mentioned in your PM.