Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
AUDIO FORUMS >> Home Theater >> Need suggestions on the home hifi audio preamp DIY
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1497519039

Message started by MatteP on 06/15/17 at 10:30:39

Title: Need suggestions on the home hifi audio preamp DIY
Post by MatteP on 06/15/17 at 10:30:39

Hi!

I am building home automation hifi audio preamplifier, which consists of motherboard and arbitrary number of audio zones.

Every zone is represented with PCB volume controller board (volume control IC with stereo audio input and audio output).

Now, the end user will be able to upgrade/downgrade this pre-amp with adding/removing audio zones (minimal 1 zone - classic stereo, maximum 8 zones - true zone preamp).

At power on, the motherboard with main microcontroller (Microchip PIC32MX795F512L datasheet: http://www.kynix.com/uploadfiles/pdf8798/PIC32MX795F512L-80I2fPT.pdf) will have to figure out the configuration of preamp, i.e., figure out the number of zone pcbs, inserted into motherboard.

What are the possible solutions for this task?

Title: Re: Need suggestions on the home hifi audio preamp DIY
Post by Jeff of Arabica on 06/16/17 at 07:04:36

You should repost in the "D.I.Y" forum topic section.  Sounds like it is more of a DIY thread topic than a home theater one.  You will get more circuit heads chiming in over there than here.  

Title: Re: Need suggestions on the home hifi audio preamp DIY
Post by Tooom on 11/06/17 at 11:11:11

I know a website of components,you can find many datasheets of the part, hope it can help you

de.findic.com
ru.findic.com

Title: Re: Need suggestions on the home hifi audio preamp DIY
Post by Cummerata on 06/03/21 at 07:56:52

I highly appreciate your hard-working skills as the post you published have some great information which is quite beneficial for me, I hope you will post more like that in the future
   

Forums » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.