Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
AUDIO FORUMS >> General Discussion and Support >> Tube roll
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1488043158

Message started by Mulenut on 02/25/17 at 17:19:18

Title: Tube roll
Post by Mulenut on 02/25/17 at 17:19:18

Hello all,
Can i replace/roll my signal tube on my se84ckc with a 12ax7?? Have some i want to try out but i am unsure if i can swap?

Many thanks,

G

Title: Re: Tube roll
Post by Acetone on 02/25/17 at 17:28:39

You cannot use a 12AX7.
These work: 6DJ8-ECC88, 7DJ8-PCC88, 6N1P(came with the amp), 6N23P, E88CC-6922 all work and can be found on E-bay and other tube suppliers online.

Title: Re: Tube roll
Post by mark58 on 02/25/17 at 17:30:34

That would be a HELL NO!!

the only place they are used to my knowledge are the ZP3, Z-stage and Z-Box. I have a lot of them for rolling in my ZP3. Mark.

Title: Re: Tube roll
Post by mark58 on 02/25/17 at 17:35:12

Acetone forgot 7308s...there are probably more but I have to run...may add a site or two later. Mark.

Title: Re: Tube roll
Post by mark58 on 02/25/17 at 17:58:50

Mule, any good ones you'd like to get rid of since you can't use them? Mark. :)

Title: Re: Tube roll
Post by mark58 on 02/25/17 at 18:16:13

Others... 6H23, Cca, PCC189, E288CC, E188CC, CV2492, CV2493...

Never bought a tube from this site but I appreciate all the free information...

http://www.audiotubes.com/6dj8.htm

Title: Re: Tube roll
Post by lLance on 02/25/17 at 20:31:56

I have purchased tubes from Brent Jesse and he is a reliable tube seller. Always a good experience.