Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl SUPPORT FORUMS FOR ZKITS >> ZKIT 1 Support forum >> Zen from Alabama https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1440886153 Message started by warwick97 on 08/29/15 at 23:09:13 |
Title: Zen from Alabama Post by warwick97 on 08/29/15 at 23:09:13 It took longer than expected to prepare and paint the aluminum chassis, but the results were worth it - Green Metalic Flake with Silver hardware. I also used a Hammond filament transformer (167Q6) with center tap to eliminate hum. The amplifier is so quiet it was several days before I noticed an audible hum while turning off for the night. Almost below perception, which is very acceptable. |
Title: Re: Zen from Alabama Post by warwick97 on 09/04/15 at 05:26:43 Thought I would show what's inside. The small circuit in the corner is a power supply for the front panel LED which produces a nice soft glow. |
Title: Re: Zen from Alabama Post by Core32 on 09/04/15 at 18:53:37 I went throwback and used a power switch with neon bulb built in that runs on the mains. Probably start flickering in a few years but that just adds to the ambience! lol |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |