Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
OLDER DECWARE GEAR SUPPORT >> TABOO MK III >> MKII to MKIII output
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1371083835

Message started by funch on 06/13/13 at 01:37:15

Title: MKII to MKIII output
Post by funch on 06/13/13 at 01:37:15

I recently purchased a used MKII Taboo, and am waiting for it to
it to be re-warrantied through Decware. It will be used solely to
drive LCD2 'phones.

I was checking out the MKIII info, and noticed the schematic, and
have an idea to build an external box to house the part of the
circuit that includes the new Lucid switch, as well as the XLR
connections. This box would be connected to the speaker output
terminals.

My questions are:
1) Is the schematic complete?
2) If so, could this be done?
3) If so, does anyone know the value of the resistor shown just
   above the new Lucid Mode switch? It appears to say 13-15,
   but I just can't make it out.

Title: Re: MKII to MKIII output
Post by funch on 06/18/13 at 03:25:46

I think I've answered my own questions. Can't be done, so that's that.

Forums » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.