Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
OLDER DECWARE GEAR SUPPORT >> CSP, CSP2, CSP2+ >> unity gain position on csp1
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1298946677

Message started by james k on 03/01/11 at 02:31:17

Title: unity gain position on csp1
Post by james k on 03/01/11 at 02:31:17

hello,  
i am posting a question about csp 1 in here because i can't locate the csp 1 support section.

anyway, the csp manual indicates that unity gain is about 1/2 way up.  would this be the 9 o'clock position or the 12 o'clock position?

thank you,

james

Title: Re: unity gain position on csp1
Post by ZYGI on 03/01/11 at 03:02:38

James,

12 O'Clock position would be half way.

ZYGI

Forums » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.