Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
OLDER DECWARE GEAR SUPPORT >> SE84A, SE84B, SE84C, SE84C+,SE84CKC >> SE84C+ with QUADS
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1269443371

Message started by Steve Deckert on 03/24/10 at 16:09:31

Title: SE84C+ with QUADS
Post by Steve Deckert on 03/24/10 at 16:09:31

Quote:

Hello Steve,

I am a happy owner of this powerful amp driving my stacked Quad ESL 57 without any problem!
I am considering the purchase of a second one to run in mono mode to gain power or to allow them to get margin to accept “forte” without distortion.
The question is : what about very low Z (less than 2 Ohms) at high frequencies of 2 esl57 in parallel for the ZEN 84CS ?
You mean that in series the two opt will see half the speaker load…

Thanks and congratulations for your highly musical gear.

Lucien (from France)

Hi Lucien,

The 2 ohm load is no problem for the amplifiers.

Steve