Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
OLDER DECWARE GEAR SUPPORT >> CSP, CSP2, CSP2+ >> Dressing Up The Trim Pots on back of the CSP2
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1256170715

Message started by Rivieraranch on 10/22/09 at 01:18:33

Title: Dressing Up The Trim Pots on back of the CSP2
Post by Rivieraranch on 10/22/09 at 01:18:33

I own not one but two CSP2 preamplifiers; one for home and another one for the office. One minor thing that bothered me about the trim pots was that they have no knobs. Besides giving the back a slightly unfinished look, it is really an impediment to being more exact about matching the settings for each channel. I was nosing around in Radio Shack the other day and found these little inexpensive knobs that cost $1.99 a pair. They cover the naked trim pot shafts and allow for easier adjustment, too. I highly recommend this little modification.    

Title: Re: Dressing Up The Trim Pots on back of the CSP2
Post by sberger on 10/22/09 at 22:19:37

Fantastic idea. I've been trying to figure out what I could use to get a more adjustment, and this seems to be the perfect solution. Going to run to RS now.

Thanks!

Forums » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.