Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
OLDER DECWARE GEAR SUPPORT >> CSP, CSP2, CSP2+ >> pcc88, pcc189, 7dj8 tubes in csp2, csp1
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1236094970

Message started by Jeff on 03/03/09 at 15:42:50

Title: pcc88, pcc189, 7dj8 tubes in csp2, csp1
Post by Jeff on 03/03/09 at 15:42:50

just making sure it's safe to run a 7dj8, pcc88, pcc189 tube in the csp1.

has anyone used these tubes in any decware stuff?

you like it?

thanks,
Jeff

Title: Re: pcc88, pcc189, 7dj8 tubes in csp2, csp1
Post by Rivieraranch on 03/06/09 at 01:11:58

I am personally using a PCC88 in my MLB and CSP2 and they work fine. The PCC 189 I don't know about. I thought that was a variable Mu. 7DJ8 would be equivalent to the PCC88.

Title: Re: pcc88, pcc189, 7dj8 tubes in csp2, csp1
Post by Rivieraranch on 03/27/09 at 02:05:56

I forgot to mention make sure that you get a good tube. I have had trouble with 2 Mullard PCC88 (7DJ8) tubes I used in the input position of my CSP2. One of them seemed to cause a low volume in one channel. I replaced it with another one and that starting humming. I fear that both of these tubes could be dying. I am now using an Electro Harmonix 6922 and the unit is dead quiet again.

Forums » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.