Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl SUPPORT FORUMS FOR DECWARE SPEAKER PLANS >> DECWARE Imperial support forum >> plans for the horn tweeter https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1183668540 Message started by asiquis on 07/05/07 at 21:49:00 |
Title: plans for the horn tweeter Post by asiquis on 07/05/07 at 21:49:00 I cannot find plans for building the horn for the tweeter on the imperial. Coul another driver set-up be used? If so what might the wise pundants suggest. OR, might I use a full range 15 inch driver and a 15" sub? Also wise suggestions would be appreciated. |
Title: Re: plans for the horn tweeter Post by Valiant on 07/10/07 at 01:57:44 My understanding is that the horn tweeter, as described by Steve in his first articles regarding the Imperial - 'Hell, those aren't big', was a cosmetic addition to the Speaker, not the ultimate must have or the Imperial wont work, tweeter. Indeed, the article goes on to say that using appropiate drivers, the Imperial has a wide audio range and could be operated as a stand alone unit. None the less, as in my case, not having the PA type 15" drivers, the use of an electronic crossover secured the high frequency stuff to a set of array speakers I built some years ago, and the results were amazing. Yes, the horn tweeters look fantastic, yes they are optional, and using simple math to generate the parabolic curve of the horn, you can design a horn to any size and dimension to satisfy your needs. Will the tweeter have good dispersion? I don't know. Just like building the Imperials, I didn't know what I was getting into until I turned them on. :o Maybe the horn tweeter will have the same effect. (Do they have an exploding head smiley, ala the Scanners shot ;) Cheers Gaz |
Title: Re: plans for the horn tweeter Post by Steve Deckert on 08/06/07 at 03:36:45 I have just posted what info I have (pics) of the bent wood horn for the imperial. https://www.decware.com/cgi-bin/yabb2/YaBB.pl?num=1186365933 -Steve |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |