Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
SUPPORT FORUMS FOR DECWARE SPEAKER PLANS >> WO32 Support Forum >> Question on Vifa sub
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1172671392

Message started by deucekazoo on 02/28/07 at 14:03:12

Title: Question on Vifa sub
Post by deucekazoo on 02/28/07 at 14:03:12

Hi all,
I had these plans for a while now but never had the time to build them. Well finally I got the bug to make these. The question is, in the original plans it calls out for a Vifa 10sub but then another sub was recomended later. Just wanted to know if there was a reason for that and if anyone actually made one of these with the Vifa sub and how it sounds.
I originally bought the plans to make the sub a coffee table but now I want to make two of these and but them under or next to my BLH speakers. Thanks for any info,

John

Title: Re: Question on Vifa sub
Post by 60_and_up on 02/28/07 at 15:22:56

my opinion is  if your sub has a qts of .35 or close and a low x max you will be god 2 go.

check the ts paramiters of your woofer, one of the paramiters, i think it is the qts needs to be very close to .35, you can search the wo32 forums for driver reccomendations. but when i built mine and did all my reading i decided people with working wo32 s used drivers withn a low x max (3 or 4 mm) and qts close to .35


no idea what qts actualy is tho?

::)

Forums » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.