Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl SUPPORT FORUMS FOR DECWARE SPEAKER PLANS >> DECWARE Imperial support forum >> modeling with Hornresp https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1134313443 Message started by Sean on 12/11/05 at 14:04:03 |
Title: modeling with Hornresp Post by Sean on 12/11/05 at 14:04:03 I'm not sure I entirely understand all of the parameters in the hornresp program. Those of you that have used this software to model Imperials, what values did you use for parameters like LRC, ATC, etc? JohnK - you have an earlier thread indicating that you did this... I wonder if you could post the input parameters you used? |
Title: Re: modeling with Hornresp Post by Michael E on 12/12/05 at 01:34:44 Hover mouse over funny parameters to find out what they are.Double click things like CMS and BL. Enter the driver parameters in order,from left to right then the bottom row left to right. Read this. If your stil stuck give me a PM Vrc = 0 Vtc = 60,000cc + S1 = Perhaps half Sd - look at plans. S2 = Easy. Approximate the expansion as an expo at first to get it about right,then input the various sections. Youl notice that a 3 or 4 section conical horn approximating an expo makes no real difference at bass frequencies-comes in handy! Mike.e Introduction Bass Horns Intro How to design a bass horn in 2 minutes! Start here if you don't have a clue about using Hornresp! Bass Horn design tips Bass Horn FAQ Look here before posting a question In more detail ... Hornresp Help A more detailed guide to using Hornresp Bass Horn design guidelines Bass Horn projects online Links to available plans Other Info Bass Horn miscellaneous info Bass Horn Glossary Bass Horn resources http://www.diyaudio.com/wiki/index.php?page=Loudspeaker |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |