Welcome, Guest. Please Login or Register
Decware Audio Forums
05/19/19 at 15:44:18†


       



Pages: 1
Send Topic Print
New updated HR-1's at the DECFEST 2018 (Read 1653 times)
Steve Deckert
Administrator
*****


If the 1st watt
sucks why continue?

Posts: 3686
New updated HR-1's at the DECFEST 2018
10/10/18 at 04:35:52
 

Please read the report of this years DECFEST aka DECWARE ZEN FEST that took place for 3 days and nights in October 2018.

http://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1536369812/37#37

This will give you the back history on the following comments.

The HR-1 is priced at the top of the speakers on the DECWARE web site because it is the most difficult to build and the overall most refined and disciplined sounding with the higher power amplifiers.

This year after I can't count how many years of reference level sound, the speaker was re-evaluated, and resigned to compete with the new DNA2. †It basically got it's balls pulled up through its nostrils and a brain transplant. †Pretty serious shit for such an acclaimed speaker. †A speaker everyone loved. †Nevertheless the crossover-less main driver in the DNA2 was so compelling that there was really no way a speaker using a crossover could compete regardless of how good it was.

So a redesigned speaker emerged that for the first time features a completely crossover-less main omnidirectional driver which simply leveled the playing field between the two speakers. †

I'm listening to it now with the 25th Anniversary Zen Triode Amplifier and getting the same UNREAL experiences I have documented with the DNA2 speakers all year. †The difference is that while not as efficient and better served by a more powerful amp, the soundstage is just S I C K. †It sounds like the DNA2 but even better and everywhere. †No matter where you are. †

While the speaker is a serious redesign, it's really not going to cost a lot more to make from scratch, so while there will be a price increase, it won't be unreasonable at all, trust me. †Worth 10 times the price whatever it is.

In the past, the HR-1 has always been a top performer. †Very disciplined and capable of dealing with and accurately reproducing higher power levels with eyebrow raising results. †It is now a speaker that makes you weak in the knees where modest -- entrancing -- listening levels can be achieved with as little as 3 watts. †Put 30 or 60 watts on it, and your couch and listening room transmute into an aircraft carrier floating in the clouds. †

So if you've been on the fence about a new pair of HR-1's I would recommend ordering them NOW before Bob figures out what the new price is going to be!!! Seriously. Kind of like early bird gets the worm. †Obviously all HR-1 owners since the beginning will also be able to send their speakers in and get them updated to the current model. †Bob is working out the upgrade prices for various years and will have them available this winter which is coming fast!

We will be updating the web page in the next several weeks with any changes price and options. †There have been no changes to the appearance of the speakers.





Back to top
 
 
WWW   IP Logged
JAG
Verified Member
**




Posts: 32
Re: New updated HR-1's at the DECFEST 2018
Reply #1 - 01/29/19 at 22:26:41
 
Steve, will there be an upgrade for the "old" HR-1's?
Back to top
 
 
  IP Logged
ZYGI
Seasoned Member
****


HR-ONE

Posts: 729
Re: New updated HR-1's at the DECFEST 2018
Reply #2 - 02/01/19 at 20:11:35
 
Jag,

Yes there is an upgrade for the older version, yes!

The driver I used for the upgrade was to be discontinued, and I waited until I had the newest version in house, and a chance to play with it.

I am very pleased with the new driver as well. I just received them this past wednesday and have only had about 4 hours with them. I'll get more listening time this weekend.

Unfortunately the speakers are  going to have to be a sent to me for the upgrade. Over the years I had different ways to mount the crossover so I have to build the new crossover accordingly.  New lower grill plates are needed to accept the new drivers as well.

Zygi
Back to top
 
 

All Decware amps and sources, Turning Point Audio speakers
  IP Logged
JAG
Verified Member
**




Posts: 32
Re: New updated HR-1's at the DECFEST 2018
Reply #3 - 02/07/19 at 11:44:35
 
Thanks, standing by for the details.
Back to top
 
 
  IP Logged
bikehappy1
Senior Member
***




Posts: 78
Re: New updated HR-1's at the DECFEST 2018
Reply #4 - 02/28/19 at 20:13:54
 
I'm psyched to have ordered a pair!! I ordered them in oak, which should be interesting since Bob hasn't used oak veneer before. If it matches my oak flooring too much, I'll have to get an isolation platform to contrast them. I'll probably get some sort of isolation/decoupling from the wood floors anyway. Anyone out there with HR-1's on wood flooring?
Back to top
 
 

Torii MKIV-25, ZP3-25, ZLC, DSR, DHC-1, Marantz SA8005, AQ Dragonfly red/jitterbug, Zenstyx, Trapeziums, klipsch KG4's, Canare, AT120P TT, 2MBlue, Herbies, Sonos and soon to be.....HR-1ís!!
  IP Logged
Archie
Seasoned Member
****




Posts: 1366
Re: New updated HR-1's at the DECFEST 2018
Reply #5 - 02/28/19 at 20:53:48
 
My floors are wood and I have my HR1s on isolation platforms.  It really tightened up the bass.  They will put out bass but the ZR2 really helps too.
Back to top
 
 

Technics 1200G TT w/ Ortofon Jubilee MC cart
ZMC1
ZP3 (25th A Mods)
ZR2 (25th A Mods)
CSP3 (25th A mods)
ZMA (25th A mods)
HR1s (Upgrd - top & bass drivers & X-ovr)
Silver Cabling
DIY Isolation platforms under everything.
  IP Logged
bikehappy1
Senior Member
***




Posts: 78
Re: New updated HR-1's at the DECFEST 2018
Reply #6 - 02/28/19 at 22:00:54
 
Are those the dark ones with a design on them that you can't get in the states anymore? I saw another forum thread on that. Right now I'm using Herbies Fat Dots on the bottom of my father-in-law made Alder platforms.
Back to top
 
 

Torii MKIV-25, ZP3-25, ZLC, DSR, DHC-1, Marantz SA8005, AQ Dragonfly red/jitterbug, Zenstyx, Trapeziums, klipsch KG4's, Canare, AT120P TT, 2MBlue, Herbies, Sonos and soon to be.....HR-1ís!!
  IP Logged
Archie
Seasoned Member
****




Posts: 1366
Re: New updated HR-1's at the DECFEST 2018
Reply #7 - 03/01/19 at 00:36:01
 
Quote:
Are those the dark ones with a design on them that you can't get in the states anymore? I saw another forum thread on that. Right now I'm using Herbies Fat Dots on the bottom of my father-in-law made Alder platforms.


Is this directed at me?  If so, my platforms are DIY.
Back to top
 
 

Technics 1200G TT w/ Ortofon Jubilee MC cart
ZMC1
ZP3 (25th A Mods)
ZR2 (25th A Mods)
CSP3 (25th A mods)
ZMA (25th A mods)
HR1s (Upgrd - top & bass drivers & X-ovr)
Silver Cabling
DIY Isolation platforms under everything.
  IP Logged
bikehappy1
Senior Member
***




Posts: 78
Re: New updated HR-1's at the DECFEST 2018
Reply #8 - 04/11/19 at 19:55:22
 
Yes it was. I'd be interested in a picture if you can. I'm still patiently waiting for the HR-1's. I also like all your responses for the 1200G!
Back to top
 
 

Torii MKIV-25, ZP3-25, ZLC, DSR, DHC-1, Marantz SA8005, AQ Dragonfly red/jitterbug, Zenstyx, Trapeziums, klipsch KG4's, Canare, AT120P TT, 2MBlue, Herbies, Sonos and soon to be.....HR-1ís!!
  IP Logged
Pages: 1
Send Topic Print