Welcome, Guest. Please Login or Register
Decware Audio Forums
12/16/18 at 06:14:48 


       



Pages: 1
Send Topic Print
Using the switcher with two turntables (Read 1529 times)
Orto
Verified Member
**




Posts: 6
Using the switcher with two turntables
11/07/17 at 15:09:40
 
I have a decware phono pramp with step up inside....I'm adding a turntable with mono rig to my system ....can I run the tables to the switcher and then to the phono pre. ....both cartridges are low output
Back to top
 
 
  IP Logged
Archie
Seasoned Member
****




Posts: 1145
Re: Using the switcher with two turntables
Reply #1 - 11/07/17 at 16:44:10
 
My sense is that running a tiny signal through a switch might be an issue compared to running a large signal.  So, switching the TTs that way wouldn't be ideal.  I take it that your TT doesn't have a SME headshell that you could use to swap between Mono and Stereo carts?  Maybe just swapping the interconnects from TT to TT would be a better solution if you really need two TTs?
Back to top
 
 

Technics 1200G TT w/ Ortofon Jubilee MC cart
ZMC1
ZP3
ZR2
CSP3 (25th A mods)
ZMA (25th A mods)
HR1s
Silver Cabling
Isolation platforms under everything.
  IP Logged
NormD
Seasoned Member
****




Posts: 145
Re: Using the switcher with two turntables
Reply #2 - 10/10/18 at 03:11:05
 
I just bought a used ZSB and I get a hum when I use it between my turntable and ZP3. I opened it up and it has resistors on the dual set of inputs. What is the difference between the low level version and the line level version?
Back to top
 
 

OPPO Sonica DAC
Technics SL-1200M3D Turntable
SoundSmith The Voice cartridge
JRMedia Center running on a MacMini
Oppo 103D for video
Marantz AV8802a Pre
ZTPre & ZMA for Stereo
Rotel RMB-1585 amp
Focal Electra 1038Be speakers (93 db)
2Hsu Research ULS-15 M
  IP Logged
Pages: 1
Send Topic Print