Welcome, Guest. Please Login or Register
Decware Audio Forums
09/18/18 at 23:06:04 


   



Pages: 1
Send Topic Print
Rectifier tubes in Zp3 and SE84CKC (Read 1401 times)
Nigel
Verified Member
**




Posts: 1
Rectifier tubes in Zp3 and SE84CKC
01/27/17 at 16:31:47
 
Hi, fancy trying out some tube rolling and want to know if the following tubes are ok to use. CV 378 (Mullards I think) and a Philips 5R4GYS
I get a bit confused with all the different codes.
If it is ok should I replace the rectifier in the Zp3 first or the Se84 to do a proper evaluation rather than both at the same time?
Many thanks in advance.
Nigel
Back to top
 
 
  IP Logged
hdrider
Seasoned Member
****


On the path with
Decware.

Posts: 481
Re: Rectifier tubes in Zp3 and SE84CKC
Reply #1 - 01/28/17 at 14:52:23
 
Nigel- my suggestion would be to only change one tube at a time, so you have a clear idea of the impact of that change. Start with the ZP3, post your findings when you have time. Happy listening (and tube rolling). Chris
Back to top
 
 

CSP3, Rachael, ZP3, ZMC 1, Oppo BDP-93, Sota Star TT w/ FR-64, Dynavector D17 mkIII Moving coil, Omega 7XRS Mk 2 walnut, DeepOmega 8 sub, Morrow Audio PH3 and MA3 IC's, Gamma Electrostatic phones.
  IP Logged
Pages: 1
Send Topic Print