Welcome, Guest. Please Login or Register
Decware Audio Forums
12/14/17 at 06:25:26 





 



Pages: 1
Send Topic Print
My listening room and system ❤️ (Read 3465 times)
EdGuY
Seasoned Member
****


Fact is just a solid
opinion.

Posts: 133
My listening room and system ❤️
11/06/16 at 08:56:32
 
https://youtu.be/Tjr2fnd8lYo

I finally found harmony! "Missing part" was 6CA7 Fuller tubes. They sound much like Psvane 6CA7 (with bit more bass) but they last much much longer (more than just 200h, that is my experience with Psvane 6CA7 in Torii amp). I was really sad when I found out that 6CA7 (Psvane) tube is best sounding tube with Torii,
but they do not last long (for some reason). So I am very glad that I found an alternative which last for long time (for about 800 hours now and sounds fantastic!).
Back to top
 
« Last Edit: 11/06/16 at 09:40:08 by EdGuY »  

Tannoy Prestige Canterbury GR,ST-300mg,IsoTek Aquarius EVO3,YARBO power.c,RGC-24,TORII MK3VCaps+silver wires+carbon resitors,CSP2+,DENON DP-A100+Karat17D3,GRADO PH-1,AURALiC Aries,GUSTARD X20-PRO ES9028PRO DAC,WA-Quantum chips,tubes WE 422A,GEC KT66,6N23P,USAF-596
  IP Logged
Lin
Seasoned Member
****




Posts: 295
Re: My listening room and system ❤️
Reply #1 - 11/06/16 at 14:26:26
 
Very nice! Cool
Back to top
 
 
  IP Logged
litefootdan
Senior Member
***




Posts: 79
Re: My listening room and system ❤️
Reply #2 - 11/07/16 at 02:40:58
 
Yes, very nice Wink
Back to top
 
 

Ortofon 2M Bronze | Merrillized AR "The Turntable" | ZP 2 | Decware Torii MKIV | Hartley Holton A
  IP Logged
JD
Seasoned Member
****




Posts: 442
Re: My listening room and system ❤️
Reply #3 - 11/07/16 at 12:35:52
 
I also love the psvane/shugang 6ca7 but agree they don't last long enough. I see that the Fuller's are same design but seems they are still made in China? I used to buy my psvane through a company in Canada and wonder if there is a connection.

beautiful speakers

JD
Back to top
 
 
  IP Logged
EdGuY
Seasoned Member
****


Fact is just a solid
opinion.

Posts: 133
Re: My listening room and system ❤️
Reply #4 - 11/07/16 at 19:26:17
 
I guess there is no many tubes that are made outside of China or Russia. Fuller is Canadian company, so design is their and quality control but manufactured in China.
I'm not sure what is made other way with dark glass Fuller tubes (I can't find any information), but I think they can handle more "stress" some how. I ordered a quad of regular Fuller 6CA7 tubes, but because they were all sold they asked if I accept special edition instead 😃 I will report when the first one dies.
Back to top
 
 

Tannoy Prestige Canterbury GR,ST-300mg,IsoTek Aquarius EVO3,YARBO power.c,RGC-24,TORII MK3VCaps+silver wires+carbon resitors,CSP2+,DENON DP-A100+Karat17D3,GRADO PH-1,AURALiC Aries,GUSTARD X20-PRO ES9028PRO DAC,WA-Quantum chips,tubes WE 422A,GEC KT66,6N23P,USAF-596
  IP Logged
Dominick
Seasoned Member
****


Still like that old
time Rock and Roll!!

Posts: 140
Re: My listening room and system ❤️
Reply #5 - 11/14/16 at 18:23:57
 
What a phenomenal space!  Besides all of the audio components, I love the addition of the violin on the top shelf!!  

Some congnac and a cigar would be pure bliss!!
Back to top
 
 

Decware ERR's [Bubinga Wood], Zstage [with Beeswax caps], Zbox, Velodyne dual firing sub, Yamaha THX SS A/V Receiver
  IP Logged
Rraymond
Seasoned Member
****




Posts: 190
Re: My listening room and system ❤️
Reply #6 - 11/14/16 at 21:28:56
 
Very cool room!
Back to top
 
 

Tori Jr., Zu Soul Superfly speakers, Acoustic Solid TT with Denon 103 MC cart, PS Audio NuWave phono, Zu Mission speaker cables with BU3 connectors.
  IP Logged
EdGuY
Seasoned Member
****


Fact is just a solid
opinion.

Posts: 133
Re: My listening room and system ❤️
Reply #7 - 11/15/16 at 20:11:00
 
😀 thank you! This is my home office and now also a listening room. It's not perfect yet but will be soon. Just ordered some acoustic panels and also searching for more acoustic solutions.
Back to top
 
 

Tannoy Prestige Canterbury GR,ST-300mg,IsoTek Aquarius EVO3,YARBO power.c,RGC-24,TORII MK3VCaps+silver wires+carbon resitors,CSP2+,DENON DP-A100+Karat17D3,GRADO PH-1,AURALiC Aries,GUSTARD X20-PRO ES9028PRO DAC,WA-Quantum chips,tubes WE 422A,GEC KT66,6N23P,USAF-596
  IP Logged
Dominick
Seasoned Member
****


Still like that old
time Rock and Roll!!

Posts: 140
Re: My listening room and system ❤️
Reply #8 - 11/17/16 at 05:44:05
 
The Tannoy's sounded great on the video... I can't imagine what they sound like in person.  

I just visited the Tannoy Prestige website and it was very cool!   I totally wish I had the $$$ to buy them.  Definitely a lifetime speaker purchase.  

Here is the link for those who are interested ....

http://www.tannoy.com/prestige/index.html
Back to top
 
« Last Edit: 11/17/16 at 05:51:47 by Dominick »  

Decware ERR's [Bubinga Wood], Zstage [with Beeswax caps], Zbox, Velodyne dual firing sub, Yamaha THX SS A/V Receiver
  IP Logged
EdGuY
Seasoned Member
****


Fact is just a solid
opinion.

Posts: 133
Re: My listening room and system ❤️
Reply #9 - 11/17/16 at 16:09:37
 
Familiar feeling!
About a year ago I got interested in Kensington Tannoy GR speakers (I read some review of them). So I went to find out where I could try them out (too valuable speakers to buy on the basis of a single review). I found one store that sells Tannoy's speakers, but they had on site only Prestige Tannoy Canterbury GR pair of speakers. They said however that these would give a good idea of what the Kensington speakers may sound.

I reserved the entire listening room (approximately 40m2) for a day, so that I could “explore” those speakers with no rush. I picked up some familiar music, and I went to try. Since I have experienced audiophile, I have been disappointed over the years often. I feared the worst, because a lot has also been criticized Tannoy's bass performance. I started with music: Dave Stewart - Lily Was Here, Manowar - Master Of The Wind, Eric Bibb - With My Maker I Am One, Luciano Pavarotti - Caruso,  Gare Du Nord - Chet's Chat... Yes I was immediately surprised positively, how natural sound they produced, there was nothing fake, sound was so alive! After a few songs I understood why some people may not like Tannoy speakers: reproduction of the bass. It is perhaps a bit too authentic, does not fit everyone, it does not color the bass at all, pure sound only. But airiness and how easily Canterbury speakers repeated even the difficult songs (with many instruments messed together) made me a positive impression. You could easily hear separate instruments as in live concert. You know the feeling that there is some kind of invisible thin plastic wrap between you and speakers, with Tannoy Canterbury GR speakers there was no such feeling. Maybe because of coaxial speakers and "sound from one point/location"-philosophy (low and high frequencies from same element), I do not know, but it is so much easyer to hear music (any kind of music) with those speakers. When I left the store I was confused. I liked very much what I heard, but I was not quite sure if it was due to the good acoustics of the room or the speakers itself. I knew that the bass is not a problem for me because I have Decwaren amplifier (only needs right tube choices/combination) and I for sure can achive even more vibrancy if needed. So I have to get the Tannoy Speakers!!! But is Kensington 12" enough (vs Canterbury 15"), basses are hardly better or sufficient any more (even with Decware multiple possibilities to boost lower frequencies). Sadly Canterbury pair of speakers exceeds my current budget, I was sad.

The next day the seller called me and asked: “What do you think? Do we already order you a pair of Kensington speakers??”. I told that I liked very much, but I do not think that Kensington speakers can provide bass level that I prefer. Canterbury speakers I can not afford at the moment😕 Then he said: OK. I have a proposition for you, what if you buy from us our presentation pair of Canterbury GR speakers at half the price? We could deliver these to your place today... I didn’t wondered for a long time Wink

Now I was afraid of how well they work together with my Decware gear, because of the quite high sensitivity 96dB, hum and etc. Yes, I was a happy man after the first song I played. The voice was even cleaner, more airy and I had to even reduce the bass slightly Cheesy I was THE happiest man in the world!!!

But because I am a audiophile enthusiast, months later, I wanted to check what my Canterbury crossover looks like. I took off the main element and peeked in. I was confused! How this-priced speaker crossover could be made of bad components! Iron core & magnetic core and Inductors and other cheap components, WTF! I wondered how these components may even sound so good? Where do the sound go if I replace all crossover components with the best components on the market? Can sound be any better? ... But this is another story  ;)
Back to top
 
« Last Edit: 11/18/16 at 11:12:59 by EdGuY »  

Tannoy Prestige Canterbury GR,ST-300mg,IsoTek Aquarius EVO3,YARBO power.c,RGC-24,TORII MK3VCaps+silver wires+carbon resitors,CSP2+,DENON DP-A100+Karat17D3,GRADO PH-1,AURALiC Aries,GUSTARD X20-PRO ES9028PRO DAC,WA-Quantum chips,tubes WE 422A,GEC KT66,6N23P,USAF-596
  IP Logged
SonicSeeker
Seasoned Member
****


Listening to the
music not the
equipment

Posts: 315
Re: My listening room and system ❤️
Reply #10 - 11/17/16 at 17:43:26
 
Waiting for the other story Smiley
Back to top
 
 

Torii Jr
ZROCK
Manley Chinook
Sonist Concerto4
VPI Signature Classic Rosewood

  IP Logged
Pages: 1
Send Topic Print