Welcome, Guest. Please Login or Register
Decware Audio Forums
10/02/14 at 15:43:25


Pages: 1
Send Topic Print
nOOb information needed (Read 721 times)
yogles
Verified Member
**




Posts: 2
nOOb information needed
07/16/13 at 08:52:35
 
Just bought plans for 10" DBmk11, understand how to build, but how does it work? How does the internal section work, it looks like it is able to slide inside the outer casing. Next, in my car I have an opening when the center section of the back seat is folded down, could I place 2 boxes in boot with port opening going thru to cabin? Have to get rid of my fairly new 12" subs and look for new 10" ones any recommendations?
Back to top
 
 
  IP Logged
ZYGI
Seasoned Member
****


HR-ONE

Posts: 642
Re: nOOb information needed
Reply #1 - 07/17/13 at 20:25:12
 
Yogles,

The moving baffle is to tune the sub to your car/driver combination. Once tuned to your liking, screw it on place and your ready to go.

Yes, placing two subs firing through the arm rest hole is perfect.

I'd use the Dayton 295-110 10" subs, tuned 1-1/2" from the bottom.

zygi
Back to top
 
 

All Decware amps and sources, Turning Point Audio speakers
  IP Logged
yogles
Verified Member
**




Posts: 2
Re: nOOb information needed
Reply #2 - 08/06/13 at 05:07:54
 
I forgot to look at this for a while, is that from the bottom of the box or top of opening? Undecided
Back to top
 
 
  IP Logged
DirtDawg
Seasoned Member
****




Posts: 173
Re: nOOb information needed
Reply #3 - 08/06/13 at 12:50:47
 

That may be for you to determine.

Every application is a little different. That is why this design is so "genius."  You can start enjoying it immediately, then after some listening tests, set it the way it sounds best in your particular application.

Once you have the sound you want, screw the sliding internal structure in place and ENJOY!
Back to top
 
 
WWW DirtDawg DirtDawg NO! NO!   IP Logged
Pages: 1
Send Topic Print