Welcome, Guest. Please Login or Register
Decware Audio Forums
11/28/14 at 20:37:36


Pages: 1
Send Topic Print
SE34I.3 Questions (Read 487 times)
RJR
Verified Member
**




Posts: 31
SE34I.3 Questions
12/30/12 at 16:44:30
 
Does the SE34I.3 have a 16 ohm tap option?

Lets say down the road you decide to hook up powered subwoofer(s).  If you did not opt for the optional outputs, can it be done?

Thanks
Back to top
 
 
  IP Logged
opnly_bafld
Ex Member



Re: SE34I.3 Questions
Reply #1 - 12/30/12 at 18:56:04
 
"Does the SE34I.3 have a 16 ohm tap option?"

I don't think so, here is the owners manual comment:

The SE34I.3 is designed to have itís maximum power into 8 ohm speakers. That does not rule out all 4 or 6 ohm speakers, or 12, and 16 ohm speakers. It simply means that statistically it will work best with around 8 ohms. Since the only thing that happens when you get a lot higher or lower than 8 ohms is the power output goes down, having efficient speakers may make this completely a non-issue. You can not hurt the amplifier by hooking up speakers that are more or less than 8 ohms.



"Lets say down the road you decide to hook up powered subwoofer(s). †If you did not opt for the optional outputs, can it be done?"

Yes, you can add a powered sub to any stereo.
Back to top
 
« Last Edit: 12/30/12 at 18:56:41 by opnly_bafld »  
  IP Logged
Pages: 1
Send Topic Print