Welcome, Guest. Please Login or Register
Decware Audio Forums
08/29/14 at 13:01:31


Pages: 1
Send Topic Print
Anyone scale and use JL Audio 18W6's in a HWK? (Read 948 times)
spanyerd
Verified Member
**




Posts: 1
Anyone scale and use JL Audio 18W6's in a HWK?
06/06/12 at 12:02:25
 
New to the forum (obviously) and am looking for opinions and help. I bought the plans for the 15" version, but I have four new 18W6's sitting around. They may not be ideal for this application but I'm hoping they'd at least be acceptable. The T/S numbers are below. I would gladly pay for pro plans. Thanks in advance!

Fs (free-air resonance): 20.0 Hz
Qts (total speaker Q): 0.384
Qes (electrical Q): 0.402
Qms (mechanical Q): 8.740
Vas (equivalent compliance): 9.00 ft3 254.9 liters
Xmax (linear excursion one-way): 0.500 in. 12.7 mm
Efficiency (1W/1m)*: 88.8 dB
Sd (effective piston surface area): 182.6 in2 0.1178m2
Re (DC resistance): 11.04 Ω (in series)
Znom (nominal impedance): Dual 6 Ω
Pt (continuous thermal power handling): 500 Watts
Back to top
 
 
  IP Logged
Ronnie Richards
Verified Member
**




Posts: 1
Re: Anyone scale and use JL Audio 18W6's in a HWK?
Reply #1 - 07/11/12 at 12:35:54
 
Well have you made connections? If yes then please try to tell me..
Back to top
 
 
  IP Logged
Pages: 1
Send Topic Print