Welcome, Guest. Please Login or Register
Decware Audio Forums
10/23/14 at 08:10:31


Pages: 1
Send Topic Print
ZKIT1 - Questions (Read 2120 times)
Kaloyanr
Verified Member
**




Posts: 12
ZKIT1 - Questions
09/10/11 at 02:20:51
 
I received the PC board Version (rev 9 2011), Thanks Steve,

Now I have some questions:

Look at the picture (attached)

1. and N. 1 - In your list this position is writen :
1 Mouser #:    75-516D108M035-E3
Mfr. #:    516D108M035PS6AE3
Manufacturer:     Vishay
Desc.:    Aluminum Electrolytic Capacitors - Leaded 1000uF 35volts 20%
RoHS:     RoHS Compliant

In the board is marked : 25 Volts, Can I use 35 V, that i already have?


2. This is position is empty and only marked (0.1uf), I have 2pcs :

      Mouser #:    539-150104J400EC
Mfr. #:    150104J400EC
Manufacturer:     Cornell Dubilier
Desc.:    Polyester Film Capacitors 400V .1UF METAL POLY
RoHS:     RoHS Compliant

I put 2 in the centre - the position that is marked .1uf 400V, Can I
use the other 2 for this that is empty / is this is the same?


3. This is empty i don't find this parts??  330K ???


4 Is this installed correctly?

I think that everything else is correct.


Best regards
Kaloyan
Back to top
 
« Last Edit: 09/10/11 at 02:21:19 by Kaloyanr »  
  IP Logged
Steve Deckert
Administrator
*****


If the 1st watt
sucks why continue?

Posts: 2425
Re: ZKIT1 - Questions
Reply #1 - 09/10/11 at 05:27:14
 
1) Yes
2) Yes
3) No, not empty, should be 330K 1/2 watt metal film
4) Looks OK although a 1 Watt resistor is large enough to handle the current and smaller in size.
Back to top
 
 
WWW   IP Logged
dank
Seasoned Member
****


pair of dual 18
Imperials

Posts: 275
Re: ZKIT1 - Questions
Reply #3 - 09/11/11 at 22:30:17
 
5% tolerance is fine.  1% works too, but there is no need to spend the extra money.

Dan
Back to top
 
 
  IP Logged
Kaloyanr
Verified Member
**




Posts: 12
Re: ZKIT1 - Questions
Reply #4 - 09/12/11 at 03:08:10
 
Almost finished...





Back to top
 
« Last Edit: 11/04/11 at 05:35:14 by Kaloyanr »  
  IP Logged
Pages: 1
Send Topic Print