Welcome, Guest. Please Login or Register
Decware Audio Forums
12/22/14 at 22:47:55


Pages: 1
Send Topic Print
WO32 8" Driver (Read 1210 times)
KDog
Verified Member
**




Posts: 1
WO32 8" Driver
08/30/11 at 07:15:04
 
Hello,
Is it possible to scale the WO32 for an 8" driver? If so how have people gone about this? Does just shrinking the height work?

If it's possible I was thinking of using two 8" drivers with the following T/S parameters:
Imp: 4ohms
Re: 3.4 ohms
Fs: 28Hz
Qes: 0.31
Qms: 2.1
Qts: 0.27
Vas: 2.05 cu/ft
Xmax: 5.0mm
Sd: 220 cm^2
Spl: 90.8dB/w
Pwr: 150 watts (cont)

Sealed enclosure volumes recommended between 0.25 - 0.37 cu/ft.

Does this sound suitable?
Cheers
Back to top
 
 
  IP Logged
HT-EXT
Seasoned Member
****


NYUK NYUK NYUK

Posts: 274
Re: WO32 8" Driver
Reply #1 - 09/06/11 at 13:24:01
 
I would say it can be done. I know 60 built the WO21. There is a post here somewhere with a pic of 60 and the WO21. Too cool !!!


HT-EXT



Back to top
 
« Last Edit: 09/06/11 at 13:25:36 by HT-EXT »  

" I TRY TO THINK BUT NUT'EN HAPPENS! " CURLY
  IP Logged
Pages: 1
Send Topic Print