Welcome, Guest. Please Login or Register
Decware Audio Forums
03/04/15 at 04:35:08


Pages: 1
Send Topic Print
Spike thread size? (Read 1816 times)
Pale Rider
Seasoned Member
****




Posts: 1278
Spike thread size?
06/19/11 at 22:57:47
 
Bob or any ERR owners: do you know what size threads the spike inserts are? Am considering trying the Herbie's threaded gliders with the ERRs. Would seem to provide good floor coupling and stability on hardwood floor.Can be seen here, about 2/3 of the way down the page.
Back to top
 
 

1st Audio: PSA DirectStream | Merrill Audio Veritas Amps | Legacy Audio Aeris Speakers
2d Audio: Lumin A1 | Taboo 3 | Audeze LCD-2 and ERR
HT: Oppo 105 | Mac mini | Emotiva XMC-1 | Emotiva XPA-7 | Sunfire XT Speakers |
NAS: Synology 1812+
  IP Logged
ZYGI
Seasoned Member
****


HR-ONE

Posts: 650
Re: Spike thread size?
Reply #1 - 06/20/11 at 01:41:23
 
Greg,

1/4-20 threads

Bob
Back to top
 
 

All Decware amps and sources, Turning Point Audio speakers
  IP Logged
Pale Rider
Seasoned Member
****




Posts: 1278
Re: Spike thread size?
Reply #2 - 06/20/11 at 04:24:00
 
Outstanding. Thank you Bob. 1/2-inch stud?
Back to top
 
« Last Edit: 06/20/11 at 04:25:50 by Pale Rider »  

1st Audio: PSA DirectStream | Merrill Audio Veritas Amps | Legacy Audio Aeris Speakers
2d Audio: Lumin A1 | Taboo 3 | Audeze LCD-2 and ERR
HT: Oppo 105 | Mac mini | Emotiva XMC-1 | Emotiva XPA-7 | Sunfire XT Speakers |
NAS: Synology 1812+
  IP Logged
ZYGI
Seasoned Member
****


HR-ONE

Posts: 650
Re: Spike thread size?
Reply #3 - 06/20/11 at 12:31:16
 
The inserts are 19mm long and the hole is bored 1-1/4" deep. So, 1/2" long stud will work fine.

ZYGI
Back to top
 
« Last Edit: 06/20/11 at 12:32:52 by ZYGI »  

All Decware amps and sources, Turning Point Audio speakers
  IP Logged
Pale Rider
Seasoned Member
****




Posts: 1278
Re: Spike thread size?
Reply #4 - 06/20/11 at 16:10:25
 
Thanks again Bob. I have ordered eight of these things with a 3/4 stud (might as well make use of as much as those 19mm as possible) to try on my first ERR pair (what will be the anchor pair for 2-channel hi-fi).
Back to top
 
 

1st Audio: PSA DirectStream | Merrill Audio Veritas Amps | Legacy Audio Aeris Speakers
2d Audio: Lumin A1 | Taboo 3 | Audeze LCD-2 and ERR
HT: Oppo 105 | Mac mini | Emotiva XMC-1 | Emotiva XPA-7 | Sunfire XT Speakers |
NAS: Synology 1812+
  IP Logged
Pale Rider
Seasoned Member
****




Posts: 1278
Re: Spike thread size?
Reply #5 - 08/03/11 at 21:36:55
 
FWIW, these little things work great in a size of 1/4" 20 x 3/4" stud:



Check them out here.
Back to top
 
 

1st Audio: PSA DirectStream | Merrill Audio Veritas Amps | Legacy Audio Aeris Speakers
2d Audio: Lumin A1 | Taboo 3 | Audeze LCD-2 and ERR
HT: Oppo 105 | Mac mini | Emotiva XMC-1 | Emotiva XPA-7 | Sunfire XT Speakers |
NAS: Synology 1812+
  IP Logged
Pages: 1
Send Topic Print