Welcome, Guest. Please Login or Register
Decware Audio Forums
04/21/14 at 02:03:55


Pages: 1
Send Topic Print
Roxul Monoboard VS Owens 705-703. (Read 2907 times)
Jef.Paas
Verified Member
**




Posts: 2
Roxul Monoboard VS Owens 705-703.
10/21/10 at 23:53:27
 
I have found a supplier for the Roxul Monoboard that sells for .45/ sqft!!!!!!

this is almost a moot point with the Owens 703 or 705 costing an Arm, Leg...and First born....

but is this what i am looking for??

http://www.roxul.com/roofing/products/roxul+monoboard%e2%84%a2

need help

thx

Jef
Back to top
 
« Last Edit: 10/21/10 at 23:55:36 by Jef.Paas »  

"One good thing about music, when it hits you, you feel no pain."
— Bob Marley
  IP Logged
jpv
Seasoned Member
****


Cause inside
everyone is a heavy
metal kid

Posts: 110
Re: Roxul Monoboard VS Owens 705-703.
Reply #1 - 11/02/10 at 02:47:05
 
Jef,
 Yes Corning 703, 705 is very exspensive. I use 60 lb rockwool made by Roxol. I get it thru ats acoustics and make my own panels. Easy to do.  http://www.atsacoustics.com/  go to the DIY page to pick what you want. I use the ridged rockwool since I use it as bass traps and they need to be able to stand up and not flop over when standing on end. They also offer already made panels. So do other sites.
Do yourself a favor and down load Room EQ wizard from Home theater shack. Make some measurements to see what you need and how it is changing your rooms acoustics. REW is free software.
Also don't forget you need enough bass trapping and absorption or diffusion on the first reflection points to make a difference. One bass trap will do nothing. I really think it hard to over do bass trapping. Do as many corners you can. Don't forget any point when the walls, floor and ceiling meet are corners.
Back to top
 
 

VPI Scoutmaster, Grado Sonata1, Counterpoint pre amp and amp (modded by Altavista Audio), Proac sp. and home made subs. Lots of room treatment. Anti-cable sp cables, Decware IC, ZKit 1.
  IP Logged
Pages: 1
Send Topic Print